Match of Sherwin Williams™ SW2053 Coast Point *

The Safety Data Sheet is tied to the specific MyPerfectColor product and chemistry, not to the Sherwin Williams color name alone. For SW2053 Coast Point, check the MyPerfectColor Safety Data Sheets page for that product so you are looking at the SDS that matches the paint you plan to order.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet, but rough, porous, or dark surfaces can reduce real-world coverage.

To order the right amount, measure the total area you plan to coat and allow for extra if the surface is textured or if you expect more than one coat.

Primer needs depend on the substrate, the condition of the surface, and the paint type you choose. As a rule of thumb, primer never hurts and can improve adhesion, but it is not always required.

If you are coating bare, repaired, glossy, or uneven material, review the prep guidance for the selected MyPerfectColor product before ordering so you can decide whether primer is the better choice.

Yes, but plastics vary a lot, so test on the actual material before committing to the full project. MyPerfectColor spray paint sticks well to most plastics, but adhesion can still depend on the specific plastic and how it was prepared.

For better adhesion on difficult plastic surfaces, use the MyPerfectColor primer for Acrylic Enamel. A small test area is the safest way to confirm the result before painting the finished part.

The finish you choose affects durability, reflectivity, cleanup, and how the matched color reads on the finished item. A higher-gloss finish will usually look different from a lower-gloss finish even when the color match itself is the same.

If you are coating a part that needs to coordinate with an existing painted surface, match the sheen as closely as practical. If you are painting a new item, choose the finish based on how the part will be used and handled.

MyPerfectColor has an original sample of the Sherwin Williams SW2053 Coast Point in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2053 Coast Point. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2053 Coast Point, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.