Match of Sherwin Williams™ SW1151 Doric White *

For the best result with MyPerfectColor paint matched to Sherwin Williams SW1151 Doric White, clean the part first, remove grease or wax, and let it dry fully. Light scuffing can help when the surface is glossy or already coated, but only where that prep is appropriate for the material. Mask off any areas you do not want painted, then test the coating on the actual surface before finishing the whole item.

That test matters because substrate texture, old coatings, and surface condition can change how a match of SW1151 Doric White looks after it is sprayed.

Choose the finish based on how the part will be used, not just the color name. MyPerfectColor can match Sherwin Williams SW1151 Doric White in different formats and finishes, and the sheen changes how reflective the finished item looks.

Higher-sheen finishes are usually easier to wipe clean and reflect more light, while lower-sheen finishes reduce reflectivity. If the item will be handled often or needs easier cleanup, that should factor into the finish you order. The same color can look different in different sheens, so use the finish that fits the application.

The SDS is tied to the specific MyPerfectColor product or chemistry, not to the Sherwin Williams SW1151 Doric White color name by itself. If you need the Safety Data Sheet, check the MyPerfectColor Safety Data Sheets page for the product format you plan to order.

The SDS page provided for this product family is https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. Make sure you review the sheet that matches the exact MyPerfectColor paint product you are buying.

For MyPerfectColor spray paint matched to Sherwin Williams SW1151 Doric White, dry-to-touch is typically within minutes. Recoat is usually in one to two hours, and the coating is fully cured in about two weeks.

Dry-to-touch, recoating, and full cure are different stages. Let the part sit long enough for the film to build properly, and handle it carefully until it has fully cured, especially on small parts or items that will be installed and used right away.

Yes. MyPerfectColor custom spray paint matched to Sherwin Williams SW1151 Doric White is a practical option for small parts and hardware where a smooth sprayed finish is useful. It can be used on items such as switch covers, vents, speaker grilles, brackets, knobs, trim pieces, and similar removable parts.

Before spraying, clean and degrease the item, mask any areas that should stay bare, and test the finish on the actual material if possible. Adhesion and appearance can vary on plastic, metal, wood, and previously coated surfaces, so a small test helps reduce ordering and application risk.

MyPerfectColor has an original sample of the Sherwin Williams SW1151 Doric White in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1151 Doric White. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1151 Doric White, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.