Match of Sherwin Williams™ SW2059 Sand *

For SW2059 Sand in spray paint, a typical can covers about 20 square feet with one coat. Actual coverage depends on the size of the part, surface texture, how much hiding power is needed, the application method, and how many coats you plan to apply.

If you are coating a small fixture, trim piece, vent, or hardware item, one can may be enough. For larger parts or surfaces, it is safer to estimate the total area and allow for extra paint if the substrate is rough, dark, or uneven. Other MyPerfectColor paint formats typically cover 400 to 600 square feet, depending on the product and surface.

MyPerfectColor custom spray paint matched to SW2059 Sand is typically dry to touch within minutes, but dry to touch is not the same as fully cured. Plan on recoating in 1 to 2 hours and allow about 2 weeks for full cure.

If you handle the part too soon, the finish can mark or shift before it has hardened. When building color with multiple coats, wait until the surface is ready for the next coat rather than rushing the process.

SW2059 Sand in MyPerfectColor custom spray paint is useful for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other parts that are awkward to coat with a brush. It is also practical for removable or small components that need to coordinate with a known paint color.

This format is often chosen when you need a matched color on items like PVC pipe, speaker grilles, access panels, switch covers, brackets, or similar parts where spray application is faster and more even than brushing.

The SDS is tied to the MyPerfectColor paint product or chemistry, not to the SW2059 Sand color name by itself. Before ordering, use the SDS for the exact product format you plan to buy.

MyPerfectColor Safety Data Sheets can be found at this SDS page.

Before applying SW2059 Sand to metal or an existing coating, clean the surface, remove rust or loose contamination, and lightly scuff sound glossy areas so the new coating can bond better. Surface condition matters because gloss, texture, and damage in the old coating can change how the finished color reads.

If the metal, plastic, or previous coating is questionable, test a small area first. That is the safest way to check adhesion and see whether the existing finish will affect the final appearance.

MyPerfectColor has an original sample of the Sherwin Williams SW2059 Sand in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2059 Sand. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2059 Sand, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.