Match of Sherwin Williams™ SW1048 Coco *

Primer depends on the substrate, surface condition, and the paint format you order. For SW1048 Coco, a primer is often a good idea on bare, uneven, porous, or previously problematic surfaces because it can improve adhesion and help the finish look more uniform.

If you are painting over a sound, properly prepared surface, primer may not be required. Check the prep guidance for the specific MyPerfectColor product you are ordering, and if you are unsure, testing on the actual surface is the safest way to reduce match and adhesion risk.

For SW1048 Coco, the finish you choose affects both appearance and performance. Lower-gloss finishes hide surface flaws better, while higher-gloss finishes are usually easier to clean but show more light reflection and can make the color read differently on the finished item.

MyPerfectColor can supply a match of SW1048 Coco in the format you need, but the sheen should be selected based on the object and its use. If you are coating trim, hardware, fixtures, or removable parts, choose the finish that best matches the durability and cleanup needs of that surface, not just the color name itself.

With MyPerfectColor custom spray paint matched to SW1048 Coco, dry-to-touch, recoat, and full handling readiness are different milestones. Spray paint is typically dry to touch within minutes, can usually be recoated in about 1 to 2 hours, and reaches full cure in about 2 weeks.

Do not assume a coat is ready for full use just because the surface feels dry. If the item will be handled, stacked, assembled, or installed, give it enough time for the coating to harden before putting it into service.

The SDS is tied to the MyPerfectColor product and chemistry, not to the SW1048 Coco color name alone. If you need safety information, look up the Safety Data Sheet for the specific MyPerfectColor product you are ordering.

For this color match, review the MyPerfectColor Safety Data Sheets page and make sure you are checking the SDS for the exact paint format, such as spray paint or another product type, since requirements can vary by chemistry.

Plastics and other low-energy surfaces vary a lot, so SW1048 Coco should be tested on the actual material before you commit to the full project. MyPerfectColor spray paint is designed to stick well to many plastics, but adhesion depends on the specific substrate and how well it was cleaned and prepared.

For better results on difficult surfaces, use the MyPerfectColor primer when appropriate and follow the prep steps for that material. This is especially important for parts like covers, grilles, fixtures, and other molded items where adhesion and wear can be more sensitive than on standard wall surfaces.

MyPerfectColor has an original sample of the Sherwin Williams SW1048 Coco in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1048 Coco. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1048 Coco, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.