Match of Sherwin Williams™ SW1006 Silhouette *

Yes, but plastics vary widely, so the best practice is to test SW1006 Silhouette on the actual part before finishing the whole item. MyPerfectColor spray paint is formulated to stick well to most plastics, and using the MyPerfectColor primer for Acrylic Enamel can improve adhesion on difficult surfaces.

This matters for items such as PVC trim pieces, vents, small fixtures, covers, or other removable parts where spray application is practical. If the substrate is unusually slick or unknown, a test panel on the same material reduces the risk of adhesion problems.

Choose the finish based on how the part will be used and how much reflectivity you want, not just the color name SW1006 Silhouette. A higher-gloss finish is usually easier to clean and can be more durable on handled parts, while a lower-gloss finish reduces shine and may be better when you want less reflection.

Keep in mind that gloss level changes how SW1006 Silhouette reads on the finished item. If you are painting hardware, vents, brackets, or trim pieces, the same color can look different in matte, satin, or gloss because the sheen changes the visual effect.

Confirm SW1006 Silhouette from a physical swatch or a known existing color reference from the original brand, not from a screen image alone. MyPerfectColor matches to the original brand color standard, so the important decision is whether SW1006 Silhouette is the target you want before you place the order.

The code SW1006 identifies the color reference, but it does not tell you the sheen, product line, or how an already painted surface may look after aging. If you are matching a specific part, verify the target color first so you order the correct MyPerfectColor match.

Yes. After a MyPerfectColor match of SW1006 Silhouette is applied, lighting, placement, sheen, and nearby surfaces can change how the color reads on the finished part. A color that looked correct in one location can appear slightly different once it is on the actual item and viewed in the final setting.

This is especially important for parts such as vents, switch covers, grilles, signage pieces, or fixtures that sit close to other painted surfaces. If appearance matters in a specific location, check the finished coating in the intended lighting before committing to a full installation.

Apply SW1006 Silhouette in light, even coats with consistent overlap and a steady spray distance. Avoid heavy passes, because they can cause runs, uneven sheen, or a muddy-looking build that changes how the matched color appears.

This approach works well for small parts like trim pieces, grilles, brackets, mailboxes, or hardware where smooth coverage matters more than fast coverage. If the surface is dark, textured, or difficult, expect that more than one coat may be needed for even appearance.

MyPerfectColor has an original sample of the Sherwin Williams SW1006 Silhouette in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1006 Silhouette. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1006 Silhouette, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.