Match of Sherwin Williams™ SW1456 Glass Bottom *

For MyPerfectColor custom spray paint matched to Sherwin Williams SW1456 Glass Bottom, a typical spray can covers about 20 square feet with one coat. Actual coverage can be lower on rough, porous, or textured surfaces, and you may need more than one coat depending on the substrate and the hiding needed.

If you are planning a larger project, estimate by total square footage, the number of coats, and whether the part is smooth or difficult to cover. It is usually smart to allow extra for test spraying and for any final coat adjustments.

Confirm Sherwin Williams SW1456 Glass Bottom from a physical swatch or a known existing color reference, not from a screen alone. MyPerfectColor matches the original brand color reference, so the target color should be verified before you place the order.

This matters most when the new piece must coordinate with an existing painted item, because lighting, aging, sheen, and substrate can all change how the finished part reads. If the reference is uncertain, verify it first so you do not order a match of the wrong color.

Yes, MyPerfectColor spray paint matched to Sherwin Williams SW1456 Glass Bottom can be used on many plastic parts, but plastics vary widely. Clean and prep the actual part first, then test on the real material before coating the full item.

For slick or low-energy plastics, the MyPerfectColor primer is recommended to improve adhesion before the color coat. A test panel is the safest way to confirm how the plastic accepts the coating and whether the finish lays down evenly.

The SDS is tied to the MyPerfectColor product chemistry, not to the Sherwin Williams SW1456 Glass Bottom color name by itself. Check the Safety Data Sheet for the exact MyPerfectColor paint format you plan to order.

If you need the SDS before using the product, look for the MyPerfectColor Safety Data Sheets page and use the document that matches the specific paint type and chemistry you are buying. That is the correct reference for safety and handling details.

MyPerfectColor spray paint matched to Sherwin Williams SW1456 Glass Bottom is usually dry to the touch within minutes, can typically be recoated in 1 to 2 hours, and reaches full cure in about 2 weeks.

Dry to touch does not mean fully handled or fully cured, so plan your project around those separate milestones. If the part will be installed, stacked, or put back into service, allow enough cure time for the coating to harden properly.

MyPerfectColor has an original sample of the Sherwin Williams SW1456 Glass Bottom in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1456 Glass Bottom. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1456 Glass Bottom, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.