Match of Benjamin Moore™ YL-22 *

Confirm Benjamin Moore YL-22 from a physical swatch or from a known existing paint reference, not from a screen image alone. MyPerfectColor matches the selected brand color standard, so the key decision is whether YL-22 is the actual target color you want matched.

If you are comparing against an existing painted surface, remember that age, sheen, and substrate can make a finished part look different from the original reference. Verify the reference first so you order the right match.

Benjamin Moore YL-22 custom spray paint is most useful for small, awkward, or removable parts where brushing is inefficient. Good examples include trim details, fixtures, railings, vents, pipes, hardware, accessories, and similar parts that need the same color as the larger project.

It is also practical when you need a repeatable match on multiple pieces or when the item has edges, cutouts, or hardware that are easier to coat evenly by spraying than by brushing.

For Benjamin Moore YL-22 spray paint, dry to touch is typically within minutes, but that does not mean the coating is ready for full handling. Plan to recoat in one to two hours and allow about two weeks for full cure.

If you need to stack, install, or reassemble the part, handle it carefully until the coating has cured. Dry time, recoat time, and cure time are different stages, and the final film keeps hardening after it feels dry.

Before ordering Benjamin Moore YL-22, confirm the color reference, the MyPerfectColor product format you need, the sheen, and the quantity. Custom-made color matches are not returnable or refundable, so the safest order is the one that matches your confirmed reference and project requirements.

For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint product options, so choose from the non-housepaint formats that fit the job, such as spray paint or other specialty match formats.

A match of Benjamin Moore YL-22 can be used on plastic parts, but plastics vary a lot, so test on the actual material before coating the full item. MyPerfectColor spray paint adheres well to most plastics, but prep quality and the specific plastic type can change the result.

Use the MyPerfectColor primer to improve adhesion when needed, especially on difficult or low-energy surfaces. If the part is a vent, cover, accessory, or fixture made of plastic, a test piece is the best way to reduce risk before the full application.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore YL-22 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore YL-22 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.