Match of Benjamin Moore™ PV-73 *

Use light, even passes and keep the spray pattern moving so the MyPerfectColor match of Benjamin Moore PV-73 builds gradually. Heavy coats can cause runs, uneven sheen, or a darker-looking wet edge, especially on edges and detailed parts.

For best results, make a test pass first, overlap each pass slightly, and let each coat flash off before adding the next one. If the part has detailed profiles or sharp corners, cover those areas with multiple light coats rather than one wet coat.

Not always. After the MyPerfectColor match of Benjamin Moore PV-73 is applied, lighting, sheen, texture, and nearby surfaces can change how the color reads on the finished item.

If the part will sit beside an existing painted surface, the safest approach is to confirm the match on the actual item or on the same substrate and in the same lighting conditions. A sprayed sample can look different indoors, outdoors, or under warm and cool light.

Yes. MyPerfectColor can supply a custom spray paint match of Benjamin Moore PV-73 for small parts and hardware where a smooth sprayed finish is easier than brushing.

This is a practical choice for switch covers, vents, speaker grilles, knobs, brackets, trim pieces, and similar items. Clean the part well and make sure the surface is ready for paint before you spray.

Plastics vary a lot, so test the MyPerfectColor match of Benjamin Moore PV-73 on the actual material first. Some plastics accept paint well, while others need extra prep or a primer to hold the coating properly.

For better adhesion on challenging plastics, use the MyPerfectColor primer for Acrylic Enamel. Also clean off oils, mold release, and dust before painting, and let the coating cure fully before handling the part heavily.

Sheen affects both the look and the durability of a MyPerfectColor match of Benjamin Moore PV-73. Lower sheen usually hides surface imperfections better, while higher sheen reflects more light and can make the finished color read a little differently.

Choose the sheen based on how the part will be used and how much cleaning or wear it will get. If the item must coordinate with nearby coated parts, match the sheen as closely as possible so PV-73 reads more consistently across the project.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore PV-73 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore PV-73 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.