Match of Benjamin Moore™ PV-50 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Benjamin Moore PV-50 is a muted blue-gray with a cool cast and a slight green-blue undertone. It has a medium-deep appearance, so it reads as subdued rather than bright, with the gray content keeping the color from looking vivid.

MyPerfectColor custom spray paint matched to PV-50 is well suited to small parts and finished components that need a controlled blue-gray look. It can be used on vents, switch covers, speaker grilles, railings, brackets, mailbox parts, shutters, shelf hardware, frames, PVC trim pieces, and other removable items where spray application helps produce even coverage on edges and corners.

Because this color is relatively muted and not especially light, it usually builds to an even read without extreme effort, but substrate and finish still matter. Smoother surfaces tend to show the cooler blue note more cleanly, while textured or absorbent surfaces can make it appear a bit deeper. As with most matched coatings, film build, sheen, and surface prep can change how the final color reads, and darker or uneven bases may need additional coats for consistent coverage.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Benjamin Moore Paints

Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore PV-50.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Benjamin Moore™ PV-50 *

Can PV-50 be ordered as MyPerfectColor custom spray paint for plastic parts or other low-energy surfaces?

Yes. A match of Benjamin Moore PV-50 can be ordered as MyPerfectColor custom spray paint for many plastic parts, but plastics vary a lot, so the same prep will not work on every item. Test on the actual material first if the part is important or highly visible.

For better adhesion on difficult plastics, use the MyPerfectColor primer for acrylic enamel before applying a match of PV-50. This is especially useful on items like PVC pipe, vents, grilles, covers, and similar parts where a spray finish is practical.

How should I choose a finish for PV-50 when ordering MyPerfectColor paint?

Choose the finish based on how the part will be used and how much reflection you want. A higher-sheen finish is usually easier to clean and can feel more durable, while a lower-sheen finish reduces shine.

Keep in mind that the same PV-50 color match can look different in different gloss levels. The finish changes how much light reflects off the surface, so the final appearance on the item may not look exactly the same in matte, satin, or gloss.

Where can I find the SDS for PV-50 from MyPerfectColor?

The SDS is tied to the specific MyPerfectColor product and chemistry you order, not to the PV-50 color name alone. If you need safety information, look up the SDS for the exact MyPerfectColor product format you plan to buy.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. If you are comparing product types, make sure you review the SDS for the same spray paint or specialty format you intend to use.

What prep is needed before applying PV-50 to metal or an existing coating?

Clean the surface first so dirt, grease, and other contamination do not interfere with adhesion. On metal, also check for rust or oxidation and remove anything loose before spraying a match of PV-50.

If you are painting over an existing coating, scuffing the surface usually helps the new coating bond. The gloss, texture, and condition of the old finish can also affect the final appearance, so a test spot is smart when the part needs a close visual match.

How long does PV-50 spray paint take to dry, recoat, and handle?

MyPerfectColor spray paint is generally dry to the touch within minutes, should be recoated in one to two hours, and reaches full cure in about two weeks.

Those are different stages, so a part may feel dry before it is ready for hard use. Film thickness, temperature, and the substrate can all affect handling readiness, so avoid heavy wear until the coating has fully cured.

How quickly will I receive my paint matched to Benjamin Moore PV-50?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Benjamin Moore PV-50 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

What are the RGB, HEX and LRV values for Benjamin Moore PV-50?

The RGB values for Benjamin Moore PV-50 are 104, 140, 162 and the HEX code is #688CA2. The LRV for Benjamin Moore PV-50 is 24.44. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about Light Reflectance Values and using RGB and Hex codes for paint.

What is spray paint matched to Benjamin Moore PV-50 made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore PV-50 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

Is Benjamin Moore Paint used to make Benjamin Moore PV-50?

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

Can I buy Benjamin Moore PV-50 locally?

You would have to ask around locally. MyPerfectColor can make and ship the Benjamin Moore PV-50 in a variety of paint types, but we are not able to comment on what other suppliers can provide. MyPerfectColor is not just working off a formula in a database - we compare every batch against the original color to verify the color accuracy. MyPerfectColor has extensive color matching capabilities and more than ten times the number of pigments available to a typical paint store.

How do I convert Benjamin Moore PV-50 to a different color from another paint company?

While we can provide Benjamin Moore PV-50 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.