70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
MyPerfectColor custom spray paint matched to Benjamin Moore PV-31 gives you a muted violet with a cool undertone and a softened, low-chroma character. It reads as a restrained purple rather than a bright or highly saturated one, so the color tends to feel quieter and less vivid on finished parts.
For spray applications, this color can work well on vents, switch covers, speaker grilles, picture frames, shelving brackets, handrail components, mailboxes, small fixtures, and hardware pieces where a subdued violet reference is needed. It is also a practical choice for PVC trim details, removable accessory parts, and other small surfaces that need to coordinate to a known Benjamin Moore color without drawing excessive attention.
Because PV-31 is more muted than a strong purple, it usually offers more forgiving coverage than a very high-chroma color, but surface prep still matters. Sheen, film build, and substrate texture can change how soft or cool the color appears, and darker or uneven surfaces may show more variation through the first coats. If the part will be used outdoors, expect weathering and UV exposure to influence violet tones more than they would with a neutral color.
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore PV-31.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Use the MyPerfectColor Safety Data Sheets page for the specific product you plan to order. For PV-31, the SDS is tied to the MyPerfectColor paint formula and format, not to the Benjamin Moore color name by itself.
Safety details can differ by product type, so check the SDS for the exact MyPerfectColor item before use.
No. The same PV-31 color reference can read differently in matte, satin, semi-gloss, or gloss because the finish changes how much light reflects off the surface and how deep the color appears.
If the part will sit beside an existing painted surface, match both the color reference and the sheen as closely as possible. For PV-31, the finish is part of how the final coated item will look, not just a preference at ordering time.
Before ordering PV-31, confirm the exact brand color reference, the MyPerfectColor product format, the sheen, and the quantity you need. Custom-made color matches are made to your order, so they should be selected carefully.
For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint product options. Choose the non-housepaint format that fits your project, and make sure the order details are correct before checkout because custom matches are not returnable or refundable.
For PV-31 spray paint, dry-to-touch usually happens within minutes. Recoating is typically done in one to two hours, and full cure takes about two weeks.
These are different stages, so do not treat a dry surface as fully cured. If you are coating parts like vents, grilles, pipe, brackets, or removable hardware, allow enough time between coats and before putting the item back into service.
Choose the sheen based on how the item will be used and handled. Higher sheen usually gives more reflectivity and easier cleaning, while lower sheen reduces shine and can make surface texture less noticeable.
For PV-31, the right format depends on the object you are coating, such as small fixtures, hardware, pipe, grilles, or other parts where spray application is practical. MyPerfectColor custom-matched paint is made to the selected Benjamin Moore color reference, but the finish you choose will still change the final look.
For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint options, so pick from the available specialty formats that fit your project.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore PV-31 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore PV-31 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.