70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore PR-86 is a dark warm red-brown with an earthy cast. The low LRV of 12.2 keeps it on the deep side, while the moderate chroma makes it read as a restrained red-brown rather than a bright red. It tends to look grounded, with a slight shift between brown and red depending on finish and substrate.
MyPerfectColor custom spray paint matched to this Benjamin Moore reference can be useful on railings, gate hardware, mailbox parts, vent covers, speaker grilles, switch plates, shelf brackets, furniture legs, and PVC trim pieces where a sprayable match is needed. It also suits small metal or plastic components on fixtures, kiosks, displays, and maintenance items when the goal is to keep removable parts aligned to one known color reference.
Because PR-86 is fairly dark, surface condition and sheen differences can be noticeable, especially on scratched, textured, or uneven parts. On lighter or patchy substrates, consistent film build matters so the red-brown reads evenly, and the final finish can make the color appear slightly deeper or more open. MyPerfectColor supplies its own paint matched to the selected brand color reference rather than the original Benjamin Moore product.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore PR-86.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Yes. For Benjamin Moore PR-86, MyPerfectColor can supply a custom match of the color in spray paint and other specialty formats for color-matching projects.
For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint product options. If your project is a part, fixture, accessory, or other non-housepaint item, choose the format that fits the surface and application method before ordering.
Yes. A match of Benjamin Moore PR-86 can be ordered as a MyPerfectColor custom spray paint match for small objects where spray application is practical, such as baskets, frames, shelving, brackets, knobs, furniture accents, decor pieces, and similar items.
If the item will be handled a lot or has a tricky surface, plan on proper prep first so the coating has a better chance of performing well on the actual object.
Plastic can be a good candidate for a match of Benjamin Moore PR-86, but plastics vary a lot, so the safest approach is to test on the actual part first. Surface texture, mold release residue, and the specific type of plastic can all affect adhesion.
MyPerfectColor spray paint is designed to adhere well to most plastics, and using the MyPerfectColor primer can help improve adhesion on difficult or low-energy surfaces.
When applying a match of Benjamin Moore PR-86 to metal or over an existing coating, clean the surface first and remove dust, grease, rust, and other contamination. If the surface is glossy or slick, scuffing it can help the new coating grip better.
The condition of the old coating matters because gloss, texture, and wear can change how the finished PR-86 color reads after spraying. If the part is important or highly visible, test the actual substrate before finishing the full piece.
MyPerfectColor spray paint matched to Benjamin Moore PR-86 is typically dry to the touch within minutes. Recoating is usually done in one to two hours, but full handling strength takes longer.
Plan on about two weeks for full cure. Dry to touch, recoat time, and full cure are different stages, so avoid heavy handling or tight assembly until the coating has had time to harden.
Yes. The finish is a practical coating choice that can change reflectivity and the way Benjamin Moore PR-86 reads on the finished item. A glossier finish tends to reflect more light, while a flatter finish reflects less.
The color code PR-86 defines the color target, but finish, texture, and substrate can all affect the final appearance. If the part will be seen next to an existing painted surface, those factors can matter as much as the color match itself.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore PR-86 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore PR-86 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.