Match of Benjamin Moore™ PR-33 *

Choose the finish based on how the item will be used, not just on the color. A finish with more sheen is usually easier to wipe clean and can feel more durable on handled parts, while a lower-sheen finish can reduce glare and make surface texture stand out less. The same PR-33 color can look different at different sheen levels, so the finish is part of the final appearance.

For Benjamin Moore PR-33, MyPerfectColor is supplying a custom match of that color reference, not the original Benjamin Moore paint line. Since Benjamin Moore color matches are not offered here as interior or exterior house paint, select from the MyPerfectColor format that fits your project and then pick the finish that best fits the part, the wear level, and the look you want.

For Benjamin Moore PR-33 in custom spray paint, a typical can covers about 20 square feet with one coat. Actual coverage depends on the size of the item, surface texture, how much paint the surface absorbs, and whether you need one coat or more than one.

If the part is rough, detailed, or a lighter PR-33 coat needs extra hiding over a dark or uneven base, plan for more material than the square-foot estimate alone suggests. For larger jobs, count the total surface area, then add extra for multiple coats, overlap, and test spray-out. For other MyPerfectColor paint formats, coverage is typically about 400 to 600 square feet, but coverage still varies by substrate and application method.

Benjamin Moore PR-33 in MyPerfectColor custom spray paint is a practical choice for small or awkward items that are easier to spray than brush, such as trim details, fixtures, railings, vents, pipes, hardware, accessories, frames, and other removable parts. It is often used when the goal is to coordinate a specific part with an existing PR-33 painted area or to coat a small component that needs a repeatable color match.

It can also be useful for items like switch covers, speaker grilles, brackets, mailboxes, shutters, or other pieces where brush marks would be hard to avoid or where the shape makes spraying more efficient. If the part is metal, plastic, wood, wicker, or previously coated, make sure the surface is properly prepared before painting so the PR-33 match performs as expected.

Not always. After a MyPerfectColor match of Benjamin Moore PR-33 is applied, the final appearance can still change based on lighting, placement, sheen, and nearby surfaces. A color that looked correct in one setting can read a little differently once it is on a vertical or horizontal part, under warm or cool light, or next to other finished materials.

If the PR-33 item will sit beside an existing painted surface, compare it in the actual location and under the light it will live in. That is especially important for small parts, hardware, or fixtures, because their position and surrounding surfaces can make the color look lighter, darker, or slightly different even when the match itself is correct.

For Benjamin Moore PR-33 in spray paint, dry-to-touch, recoat time, and full cure are different stages. Spray paint is usually dry to the touch within minutes, can typically be recoated in one to two hours, and is fully cured in about two weeks.

That means you can often handle the project carefully sooner than full cure, but the coating is still hardening for days afterward. If you are painting a PR-33 fixture, pipe, vent, or hardware piece, allow enough time between coats and before heavy use so the finish can build properly without being disturbed.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore PR-33 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore PR-33 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.