Match of Benjamin Moore™ OT-32 *

Finish changes how OT-32 looks on the finished item because sheen affects reflectivity and how light bounces off the surface. A lower sheen usually looks less reflective and can make the color read a bit softer, while a higher sheen can make the same match look different because it reflects more light.

If you need OT-32 to coordinate with an existing coated part, match the finish as closely as possible and remember that the substrate, texture, and spray build also affect the final appearance.

The SDS is tied to the specific MyPerfectColor product formulation, not the OT-32 Benjamin Moore color name by itself. Use the MyPerfectColor Safety Data Sheets page for the product you are ordering: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

If you order a different MyPerfectColor format, check the SDS for that specific product as well.

Coverage depends on the size of the part, the surface texture, how much hiding is needed, the application method, and the number of coats. As a planning guide, one can of spray paint typically covers about 20 square feet with one coat.

If the surface is rough, porous, or a dark color that needs more hiding, plan for extra material. For other MyPerfectColor formats matched to OT-32 Benjamin Moore, check the specific product coverage before ordering so you do not run short.

Choose the finish based on how the part will be used. Higher sheen usually gives more reflectivity and is easier to wipe clean, while lower sheen is less reflective and can be more forgiving on surface imperfections. Because sheen changes how OT-32 reads after application, the same color can look different in different finishes.

If you are coating a removable part, fixture, or hardware piece, pick the finish that best fits the use of that item rather than assuming one sheen will look the same as another.

For spray paint, dry-to-touch is usually within minutes, recoating is typically allowed in about 1 to 2 hours, and full cure takes about 2 weeks. These are different stages, so a part can feel dry before it is ready for heavy handling or reassembly.

If the item will be installed, stacked, or used soon after painting, give OT-32 as much cure time as the project allows before putting the part into service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OT-32 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore OT-32 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.