Match of Benjamin Moore™ OP-102 *

Plan around the surface, not just the color. A standard can of MyPerfectColor custom spray paint matched to Benjamin Moore OP-102 typically covers about 20 square feet with one coat, but real coverage changes with texture, porosity, masking, application method, and how many coats you need.

If the part is rough, light-colored, or likely to need extra coats for even coverage, order additional material so you do not run short mid-project. For larger jobs, measure the area first and allow extra for test spray-outs and any final pass you may need.

Use light, even coats of MyPerfectColor custom spray paint matched to Benjamin Moore OP-102 instead of one heavy pass. Keep the can moving, overlap each pass slightly, and maintain a consistent spraying distance so the coating builds evenly.

Heavy passes can cause runs, uneven sheen, or a muddy-looking color build. If the first coat looks thin, it is usually better to apply another light coat after the surface flashes off than to try to cover everything at once.

Clean the surface first, remove grease or wax, and lightly scuff it where appropriate so the coating can bond. Mask off nearby areas you do not want coated, and test the color on the actual item before painting the full piece.

Good prep matters when you are applying a match of Benjamin Moore OP-102 to small parts, fixtures, or accessories because contamination and poor adhesion can change how the finished color and sheen read.

Yes, MyPerfectColor spray paint is commonly used on many plastics, but plastics vary a lot, so test on the actual material first. For difficult plastics or other low-energy surfaces, use the MyPerfectColor primer to improve adhesion before applying Benjamin Moore OP-102.

If the part is smooth, flexible, or made from an unfamiliar plastic, do a small trial area first. That helps confirm adhesion and lets you see how the color builds on that specific substrate.

Confirm Benjamin Moore OP-102 from a physical swatch, chip, or an existing known color reference rather than from a screen image. MyPerfectColor matches the original brand color standard, so the target color needs to be correct before you place the order.

If you are matching an already painted item, compare it to the actual reference under the lighting where it will be used. That is the safest way to avoid ordering a match of the wrong Benjamin Moore color.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OP-102 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore OP-102 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.