70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore GN-31 is a muted green-family reference with a controlled, understated appearance. In spray paint, it reads as a practical color for parts where a softer green note is needed without a bright or saturated look taking over the surface.
MyPerfectColor custom spray paint matched to GN-31 can be used on vents, switch covers, speaker grilles, brackets, railings, shutters, mailboxes, PVC trim pieces, and hardware. It also works for baskets, shelving, frames, knobs, and removable fixtures where a consistent green tone is needed on metal, plastic, wood, or previously coated parts.
Muted colors like this usually cover more predictably than vivid hues, but the final appearance still depends on surface prep, substrate, and finish. Different gloss levels can make the color read deeper or flatter, and textured or uneven surfaces may show more variation until the coating builds evenly.
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore GN-31.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
The SDS is tied to the MyPerfectColor product you order, not to the Benjamin Moore GN-31 color name by itself. To find it, use the MyPerfectColor Safety Data Sheets page and look for the SDS that matches the specific MyPerfectColor paint or chemistry you selected.
If you are comparing products, check the SDS before ordering so you know which coating system you are getting for your GN-31 project.
For Benjamin Moore GN-31, use several light, even coats instead of one heavy coat. Keep the spray moving, overlap each pass slightly, and avoid pausing on one spot too long because that is what usually causes runs, heavy texture, or uneven sheen.
Let each coat flash off according to the product instructions before adding the next coat. If the part is small or detailed, practice on a test piece first so you can confirm coverage and spray pattern before coating the final item.
Finish changes how much light the coated item reflects, so the same Benjamin Moore GN-31 match can look different in flat, satin, or gloss versions. A higher sheen usually reads more reflective, while a lower sheen hides reflection and texture more.
If your project needs GN-31 to coordinate with an existing part, choose the finish carefully because sheen can change the way the color is perceived even when the color formula is the same.
Yes, but plastics vary a lot, so Benjamin Moore GN-31 should be tested on the actual material before you coat the final part. Clean the surface well, and if the plastic is difficult to coat, use the MyPerfectColor primer made for better adhesion.
MyPerfectColor spray paint adheres well to most plastics, but low-energy or unusual plastics can still need extra prep. A test spray on the real part is the safest way to confirm adhesion and coverage before you finish the project.
Before ordering Benjamin Moore GN-31, confirm the color reference, the MyPerfectColor product type, the finish, and the quantity you need. For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint options, so choose one of the non-housepaint formats that fits your project.
Custom-made color matches are not returnable or refundable, so it is important to verify the exact GN-31 reference and the product format before checkout. This is especially important if the part must coordinate with an existing surface or be repeated later.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore GN-31 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore GN-31 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.