70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore GN-22 is a muted gray-green with a soft sage undertone and low chroma. It sits in a medium-light range rather than reading pale or dark, and the color has enough gray in it to stay restrained instead of looking bright or clean.
MyPerfectColor custom spray paint matched to the selected Benjamin Moore color can be used on vents, switch plates, speaker grilles, mailboxes, railings, brackets, shelving, and hardware where a low-key green-gray is needed on a small part. It also works well on PVC trim pieces, fixture covers, baskets, frames, and other removable items that are easier to finish evenly with spray application than with a brush.
Because the color is quiet rather than highly saturated, it usually hides more easily than vivid greens, but the final read still changes with finish, film build, and substrate texture. A smoother surface and fuller coat will make it look cleaner and more even, while rough plastic, bare metal, or older coatings can shift it toward lighter or grayer-looking patches if preparation is inconsistent.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore GN-22.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Confirm GN-22 from a physical Benjamin Moore swatch or another known color reference, not from a screen image alone. MyPerfectColor makes a custom-matched paint to the selected brand color reference, so the target should be verified before you order.
If you are matching an existing part, use an untouched sample or a known standard whenever possible. That helps reduce the risk of matching a faded, dirty, or aged surface instead of the original GN-22 color.
Clean the surface first to remove dust, grease, and other contamination. If the existing coating is glossy or smooth, scuff it so the new coating can bond better. If there is rust, loose paint, or peeling material, remove that before painting.
MyPerfectColor custom spray paint matched to Benjamin Moore GN-22 can be useful for metal fixtures, railings, hardware, vents, grilles, and similar parts, but the condition of the old surface can affect how the finished color looks. Sheen, texture, and remaining defects can all show through the new coat, so a test area is a practical step when the result matters.
Even when the color match is correct, GN-22 can read differently after application because of lighting, placement, sheen, and nearby surfaces. A part viewed outdoors, under bright task lighting, or next to another finished surface may look different from the same color in a sample card or on a screen.
If the item will sit next to an existing painted surface, review the match under the actual lighting where it will be used. That is the best way to judge whether the finished result meets your needs.
The SDS is tied to the MyPerfectColor product chemistry, not the GN-22 color name by itself. You can find MyPerfectColor Safety Data Sheets here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm
If you need the SDS for a specific format, check the sheet for the exact MyPerfectColor product you are ordering.
Use light, even coats and keep the spray moving so you do not build up too much material in one pass. Hold a consistent distance, overlap each pass slightly, and avoid heavy wet coats that can cause runs, uneven sheen, or a muddy build of color.
This approach is useful on practical items such as vent covers, switch plates, pipe, mailboxes, brackets, trim pieces, and other small parts where MyPerfectColor custom spray paint matched to Benjamin Moore GN-22 is easier to apply than brushing. If the surface is awkward or vertical, several thin coats are usually safer than one heavy coat.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore GN-22 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore GN-22 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.