Match of Benjamin Moore™ ET-28 *

MyPerfectColor spray paint matched to Benjamin Moore ET-28 can work on many plastics, but plastics vary a lot, so the safest approach is to test the actual part first. Some plastics accept coating well after cleaning, while others need more prep to get dependable adhesion.

For better adhesion on difficult plastic surfaces, use the MyPerfectColor primer made for this purpose before applying the ET-28 match. A test on the real material is especially important for items like covers, trims, fixtures, and molded parts where surface chemistry can differ.

No. A match of Benjamin Moore ET-28 can read differently in matte, satin, gloss, or other finishes because sheen changes how light reflects off the surface. The color match can be the same, but the finished item may still look different once the coating is applied.

If you are trying to coordinate with an existing painted part, finish is a practical ordering choice, not just a style choice. When possible, choose the finish that is closest to the item you are coating, or test first if the finish change matters to your project.

MyPerfectColor custom spray paint matched to Benjamin Moore ET-28 is a practical choice for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other items that are awkward to coat with a brush. It is especially useful when you want a repeatable color on a small part that can be sprayed more efficiently than painted by hand.

This format is often a better fit for removable or hard-to-reach parts such as switch covers, grilles, brackets, mailboxes, shelving pieces, and other components that need to coordinate with an existing Benjamin Moore ET-28 painted environment.

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the Benjamin Moore ET-28 color name alone. That means you should check the SDS for the exact MyPerfectColor format you are ordering, such as spray paint or another specialty format.

If you need the SDS before ordering or using the product, go to the MyPerfectColor Safety Data Sheets page and look up the SDS for the specific product. Do not assume the ET-28 color reference by itself tells you the safety information.

MyPerfectColor spray paint matched to Benjamin Moore ET-28 is typically dry to the touch within minutes, can usually be recoated in about 1 to 2 hours, and reaches full cure in about two weeks. Those are different stages, so do not treat dry-to-touch as fully ready for heavy handling.

For best results, allow enough time between coats and be careful with handling, installation, or stacking until the coating has had time to cure. If the part will be put into service quickly, plan around the cure time rather than only the dry-to-touch time.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore ET-28 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore ET-28 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.