Match of Sherwin Williams™ SW6484 Meander Blue *

Surface prep matters as much as the color. Clean off dirt, oil, wax, and loose material first, then remove any rust or contamination on metal. If the old coating is glossy or slick, scuff it so the new paint can grip better. The condition of the existing finish can affect how SW6484 Meander Blue looks after it dries, especially if the old surface has wear, texture, or uneven sheen.

If the item will sit next to an existing painted area, test a small section first so you can check adhesion and appearance before doing the whole part.

For spray paint, dry-to-touch happens within minutes, but that is not the same as being ready for full handling. Plan to recoat SW6484 Meander Blue in about 1 to 2 hours. Full cure takes about two weeks, so avoid heavy use or hard handling until then.

If you need to stack, mount, or install the part soon after painting, wait for the paint to reach the handling stage rather than relying only on the dry-to-touch time.

A typical can of spray paint covers about 20 square feet with one coat, but real coverage depends on the size and shape of the part, the surface texture, how much hiding is needed, the spray method, and how many coats you plan to apply.

Rough, detailed, or dark surfaces usually use more paint than smooth, light, simple ones. If you are coating trim pieces, fixtures, or hardware, it is smart to allow extra paint for overspray, edges, and a second coat if needed.

Choose the sheen based on how the item will be used and how much reflectivity you want, not just on the color reference itself. Higher gloss finishes are usually easier to clean and can be more durable, but they reflect more light and can make SW6484 Meander Blue look different on the finished part. Lower gloss finishes reduce reflection, but may not clean as easily.

If you need the new part to coordinate with an existing painted surface, try to match the sheen closely because gloss level can change the final look even when the color match is correct.

Yes, but plastics vary a lot, so test on the actual material before painting the full part. MyPerfectColor spray paint sticks well to most plastics, but some slick or low-energy surfaces may need extra prep or a primer for better adhesion.

If the item is flexible, unknown, or has a molded finish, testing first is the safest way to confirm how SW6484 Meander Blue will bond and how it will look after it dries. MyPerfectColor primer for Acrylic Enamel can help improve adhesion on challenging surfaces.

MyPerfectColor has an original sample of the Sherwin Williams SW6484 Meander Blue in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6484 Meander Blue. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6484 Meander Blue, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.