Match of Sherwin Williams™ SW6409 Edgy Gold *

Start by cleaning off dirt, oils, wax, and loose residue, then degrease the surface. Lightly scuff smooth areas when appropriate, mask anything that should not be painted, and test SW6409 Edgy Gold on the actual material before coating the full item. Good prep helps the MyPerfectColor match apply more evenly and lowers the risk of adhesion or appearance problems.

If the surface has an unknown coating, repairs, or a slick finish, a test spot is especially important before you order or apply the full can.

For spray paint, plan around about 20 square feet of coverage per can for one coat. Coverage can change based on surface texture, how much hiding power is needed, the application method, and how many coats the project requires.

If you are coating a larger part or several items in SW6409 Edgy Gold, measure the total area and build in extra paint so you do not run short midway through the job. If you switch to a non-spray format, coverage is typically much higher, often about 400 to 600 square feet depending on the product.

Yes for many plastics, but plastic substrates vary a lot. Test SW6409 Edgy Gold on the actual part first because some plastics and other low-energy surfaces may need different prep or primer before the coating will hold well.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. A quick test on the real material is the safest way to check both adhesion and appearance before you paint the full item.

Look up the Safety Data Sheet for the MyPerfectColor product or chemistry you plan to order, not the SW6409 Edgy Gold color name alone. SDS details are tied to the actual paint formulation, so the correct document depends on the product format you choose.

MyPerfectColor Safety Data Sheets are available on the site for the product you are buying. If you need the SDS before ordering, confirm the exact format first.

Use a physical Sherwin-Williams swatch or a known existing SW6409 Edgy Gold reference rather than relying on a screen view alone. MyPerfectColor matches to the original brand color standard, so confirming the target color first helps avoid ordering the wrong match.

If you are comparing against an existing painted item, verify the reference under the lighting where the part will be used. That gives you a more reliable ordering decision than looking at a digital image.

MyPerfectColor has an original sample of the Sherwin Williams SW6409 Edgy Gold in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6409 Edgy Gold. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6409 Edgy Gold, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.