Match of Sherwin Williams™ SW6278 Cloak Gray *

Confirm SW6278 Cloak Gray from a physical Sherwin-Williams swatch or a known existing painted reference, not from an on-screen image alone. MyPerfectColor makes a custom match to the selected brand color standard, so the order should be based on the exact target color you want reproduced.

If you are matching an existing item, verify that the reference is really SW6278 Cloak Gray before you place the order. That reduces the risk of ordering a close but wrong color.

For MyPerfectColor custom spray paint matched to SW6278 Cloak Gray, expect it to be dry to the touch within minutes, ready for recoating in about 1 to 2 hours, and fully cured in about two weeks. Those stages are different, so a coat may feel dry before it is ready for handling or final use.

Exact timing can vary with temperature, humidity, film thickness, and the surface you spray. If you need the best result, allow the paint to dry between coats and avoid heavy handling until it has had time to cure.

Choose the sheen based on how the item will be used and cleaned, because the finish changes how SW6278 Cloak Gray reads on the finished part. A glossier sheen is usually easier to clean and more durable-looking, while a flatter sheen reduces reflectivity and can be less revealing of minor surface flaws.

If the item will be handled often or needs easier cleanup, a higher sheen may make more sense. If you want less shine on the finished surface, choose a lower sheen, but expect the same SW6278 Cloak Gray color to look different from matte to gloss.

Not always. After application, SW6278 Cloak Gray can read differently because of lighting, placement, the neighboring surfaces, and the sheen of the finished item. The same custom match can look a little different on a smooth metal part, a textured plastic piece, or in warm versus cool light.

If the painted item will sit beside an existing surface, check the final look under the lighting where it will actually be used. That is the best way to judge whether the match works in your specific project.

Coverage depends on the size of the item, surface texture, hiding power, application method, and how many coats you plan to apply. A typical spray can covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet, depending on the product and surface.

If the surface is rough, porous, dark, or uneven, plan for more paint because it may take extra coats to get even coverage. For SW6278 Cloak Gray, it is better to estimate a little high than to run short before the project is finished.

MyPerfectColor has an original sample of the Sherwin Williams SW6278 Cloak Gray in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6278 Cloak Gray. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6278 Cloak Gray, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.