70% of Orders Ship within 3 Business Days.
Match of Sherwin Williams™ SW6134 Netsuke *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of Sherwin Williams SW6134 Netsuke is a light beige with a soft warm cast and low saturation. It reads as a muted tan-cream rather than a bright cream, with a gentle yellow-brown undertone and enough lightness to stay airy. In MyPerfectColor paint, it works as a match when you need a quieter beige that does not lean strongly pink or gray.
MyPerfectColor custom spray paint matched to this color can be useful on PVC pipe, HVAC vents, switch plates, speaker grilles, mailboxes, shelf brackets, railing parts, shutters, and other small components that need a warm neutral finish. It is also a practical choice for hardware, trim pieces, access panels, and replacement accessories where a spray application is easier than brushing and the goal is to keep the part consistent with an existing beige-painted surface.
Because this is a light color, dark substrates, patchy primers, or uneven surface color can show through more easily and may need extra coats for even coverage. Finish also matters: smoother or glossier films often make the warmth appear a bit deeper, while flatter finishes can soften the color and make it read slightly drier. Good surface prep and uniform film build help the match read more consistently across different materials.
Similar colors:
Product Data
About Sherwin-Williams
The SHERWIN-WILLIAMS COMPANY was founded by Henry Sherwin and Edward Williams in 1866. Today, the company is a global leader in the development, manufacture and sale of coatings and related products.
Matching Sherwin-Williams Paint Colors
MyPerfectColor matches all of the Sherwin-Williams paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Sherwin-Williams color by matching the original Sherwin-Williams color books and swatches. MyPerfectColor is not using Sherwin-Williams paint.
The colors shown on this website are computer video simulations of the Sherwin-Williams Color and may not match Sherwin-Williams Color standards. Refer to Sherwin-Williams Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Sherwin-Williams color. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of Sherwin Williams™ SW6134 Netsuke *
How do I confirm SW6134 Netsuke before ordering a MyPerfectColor match?
Confirm SW6134 Netsuke from a physical swatch or a known existing sample, not from a screen. MyPerfectColor is making a custom match to that brand color reference, so a real sample is the best way to reduce the risk of ordering the wrong color. This is especially important if the new part will sit next to an existing painted surface, where age, lighting, and finish can change how the color reads.
Where can I find the SDS for SW6134 Netsuke?
The SDS is tied to the MyPerfectColor product and its chemistry, not to the Sherwin Williams color name alone. For SW6134 Netsuke, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm to review the current document for the product you are ordering. If you need the SDS for a different MyPerfectColor format, check the SDS for that exact product type.
Which finish should I choose for SW6134 Netsuke?
Choose the finish based on how the part will be used and how much reflectivity you want on the finished item. Higher gloss usually gives a more reflective look and can be easier to wipe down, while flatter finishes reduce shine. The same SW6134 Netsuke color can read differently from one finish to another, so match the finish to the object and use case, not just the color name. This matters on spray-painted items like vents, hardware, railings, trim pieces, and similar parts.
Can SW6134 Netsuke be applied over metal or an existing coating?
Yes, but the surface condition matters. Clean off dirt, oil, chalk, and contamination first, then scuff the surface so the new coating can bond. If there is rust, loose paint, or an unstable old coating, address that before painting. The gloss, texture, and wear of the old coating can also change how SW6134 Netsuke looks after it is sprayed, so a test on the actual part is wise for metal fixtures, grilles, railings, or similar items.
How long does SW6134 Netsuke spray paint take to dry and recoat?
For MyPerfectColor spray paint matched to SW6134 Netsuke, dry-to-touch is typically within minutes, recoating is generally done in 1 to 2 hours, and full handling readiness takes longer, with full cure around two weeks. Dry-to-touch, recoat, and fully cured are different stages, so do not handle the part just because it feels dry on the surface. That timing is especially relevant for small parts, fixtures, and removable items that may need more than one coat for even coverage.
How quickly will I receive my paint matched to Sherwin Williams SW6134 Netsuke?
What are the RGB, HEX and LRV values for Sherwin Williams SW6134 Netsuke?
What is the Hue Angle and Chroma for Sherwin Williams SW6134 Netsuke?
Which paint matching the Sherwin Williams SW6134 Netsuke would be best for interior walls?
How can MyPerfectColor match the Sherwin Williams SW6134 Netsuke?
MyPerfectColor has an original sample of the Sherwin Williams SW6134 Netsuke in its color archive. This enables us to make paint and verify that it matches the original.
Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.
Learn more about our color matching service.
How much area will one spray can cover? And what is Sherwin Williams SW6134 Netsuke spray paint made of?
To make spray paint matched to Sherwin Williams SW6134 Netsuke. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.
How do I find the same color as the Sherwin Williams SW6134 Netsuke in a different company?
While MyPerfectColor can provide paint matched to the Sherwin Williams SW6134 Netsuke, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.
However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.