Match of Sherwin Williams™ SW6108 Latte *

Confirm SW6108 Latte from a physical swatch, a known painted sample, or another reliable original brand reference before you order. Screen images can shift with lighting and device settings, so they are not a dependable way to approve the color.

MyPerfectColor makes a custom match of SW6108 Latte in its own paint products, not the original Sherwin Williams paint. Verifying the target color first helps reduce the risk of ordering the wrong match.

Yes, SW6108 Latte can be used on metal or over an existing coating, but the surface needs proper prep first. Clean off dirt, grease, wax, and loose material, and remove rust or corrosion before coating.

If the old finish is glossy or slick, scuff sanding helps the new coating grab. The condition of the existing coating, along with its gloss and texture, can affect how SW6108 Latte looks after it dries, so a sound, well-prepared surface gives you the best chance of a clean result.

Plastic can vary a lot, so SW6108 Latte should be tested on the actual item before you commit to the full project. MyPerfectColor spray paint sticks well to most plastics, but adhesion can still depend on the specific material and its surface condition.

For difficult plastics, use the MyPerfectColor primer for acrylic enamel to improve adhesion and reduce the chance of peeling or poor hold. Cleaning the part first and doing a test spray on a small area is the safest way to confirm the result on your exact substrate.

Coverage depends on the size of the item, the surface texture, the hiding power needed, the spray method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat, but real coverage can be lower on rough or porous surfaces.

If you are coating a large part, a textured item, or a darker surface that may need extra coats, plan conservatively and order enough for full coverage plus a little margin. That helps avoid running short before the finish is even.

Apply SW6108 Latte in light, even passes instead of heavy wet coats. Hold the can at a consistent distance, overlap each pass slightly, and keep the spray moving so the color builds evenly.

Heavy passes can cause runs, uneven sheen, or a muddy-looking build, especially on edges and small parts. Let each coat flash as directed on the product label before adding the next coat so the finish has a better chance to level out cleanly.

MyPerfectColor has an original sample of the Sherwin Williams SW6108 Latte in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6108 Latte. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6108 Latte, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.