Match of Sherwin Williams™ SW6058 Likeable Sand *

Primer depends on the surface, its condition, and the paint type you plan to use. For SW6058 Likeable Sand, primer is often helpful on bare material, repaired areas, porous surfaces, glossy surfaces that need better grip, or when you want to improve adhesion and uniformity. A primer does not always have to be used, but it usually does not hurt and can improve the result.

If you are ordering MyPerfectColor paint matched to SW6058 Likeable Sand, check the prep guidance for the specific product format and the actual substrate before you start.

The SDS is tied to the MyPerfectColor paint product and chemistry, not to the SW6058 Likeable Sand color name by itself. If you need the Safety Data Sheet for the MyPerfectColor match of SW6058 Likeable Sand, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you are comparing different product formats, make sure the SDS matches the exact MyPerfectColor product you plan to order.

Choose the sheen based on how the item will be used and how you want the finished surface to behave. Lower sheens usually hide surface flaws better, while higher sheens are typically easier to clean and reflect more light. Because sheen changes how SW6058 Likeable Sand looks after application, the same color can read differently in flat, satin, semi-gloss, or gloss finishes.

If the item will be handled often or needs easier cleanup, a more durable, higher-sheen finish may be practical. If the surface has imperfections you want to minimize, a lower sheen may be the safer choice.

Coverage depends on the size of the item, the surface texture, the hiding power needed, the application method, and how many coats are required. As a general guide, a typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet, but the actual result can be lower or higher depending on the surface.

For SW6058 Likeable Sand, plan extra material if you are coating a rough, porous, or high-contrast surface, or if you expect to need more than one coat for even coverage.

Plastics vary a lot, so the best approach is to test SW6058 Likeable Sand on the actual material first. MyPerfectColor spray paint is designed to stick well to most plastics, but adhesion can still depend on the specific plastic, how smooth it is, and how well it was cleaned and prepared.

If the surface is plastic or another low-energy material, using the MyPerfectColor primer can improve adhesion before applying the SW6058 Likeable Sand match. For the most reliable result, prep the surface and test a small area before coating the full item.

MyPerfectColor has an original sample of the Sherwin Williams SW6058 Likeable Sand in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6058 Likeable Sand. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6058 Likeable Sand, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.