Match of Sherwin Williams™ SW6010 Flexible Gray *

Clean the surface first, remove grease, dust, wax, and loose material, then lightly scuff only where the substrate or existing coating can be safely abraded. Mask the area you do not want painted and test the match on the actual surface before painting the full part.

For SW6010 Flexible Gray, prep matters because gloss, texture, and the condition of the base material can change how the finished match reads. If the item is already coated, make sure the old finish is sound before you apply MyPerfectColor custom-matched paint.

Confirm the brand color reference, the MyPerfectColor product format you need, the sheen, and the quantity before you place the order. A match of Sherwin Williams SW6010 Flexible Gray is a custom color match, so the order should be checked carefully against the exact target you want.

Custom-made color matches are not returnable or refundable, so it is best to verify the reference color name or code and make sure the product type fits the surface and application before buying.

Yes, but plastics vary widely, so test on the actual part first. MyPerfectColor spray paint sticks well to most plastics, but you should still confirm adhesion on your specific material before coating the full item.

If the plastic is difficult or low energy, use the MyPerfectColor primer to improve adhesion and reduce the risk of peeling or poor bond. That is especially important when painting removable parts, trim pieces, or hardware in SW6010 Flexible Gray.

Choose the sheen based on how the item will be used and how much reflectivity you want. Lower sheens usually hide surface variation better, while higher sheens are easier to wipe clean and can look more reflective.

With SW6010 Flexible Gray, the matched color can read differently from one sheen to another, so keep the sheen consistent across parts that need to coordinate. If you are matching an existing item, the sheen on that item is part of the decision, not just the color name.

The SDS is tied to the MyPerfectColor product or chemistry, not to the brand color name alone. For SW6010 Flexible Gray, look up the Safety Data Sheet for the exact MyPerfectColor paint product you plan to order.

MyPerfectColor Safety Data Sheets are available on the MyPerfectColor Safety Data Sheets page. Use that page to confirm the SDS for the specific product format you are buying.

MyPerfectColor has an original sample of the Sherwin Williams SW6010 Flexible Gray in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6010 Flexible Gray. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6010 Flexible Gray, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.