Match of Samson™ Coral Sand *

For Samson Coral Sand 25887 in MyPerfectColor spray paint, dry-to-touch can happen within minutes, but recoating is generally best after 1 to 2 hours. Do not treat dry-to-touch as full cure. If the part needs to be handled, stacked, or reinstalled, allow about 2 weeks for full curing so the coating can reach its final handling strength.

The SDS is tied to the MyPerfectColor product and chemistry you order, not to the Coral Sand 25887 color name by itself. If you need the SDS for a Samson Coral Sand match, use the MyPerfectColor Safety Data Sheets page for the exact product format you are buying. Check the SDS for the specific spray paint or other product line, since the safety information follows the product, not just the color reference.

Finish changes how much light the coating reflects, so the same Samson Coral Sand 25887 match can read differently on the finished item depending on sheen. That is a practical coating choice, not just an appearance preference. If the part already has a specific sheen or will sit next to other coated pieces, make sure the finish you order is appropriate for the item you are painting, because the sheen can change how the color appears after application.

Before spraying Samson Coral Sand 25887, clean the surface, remove grease or residue, and lightly scuff where appropriate so the coating can bond well. Mask off any areas you do not want coated, and test on the actual surface before doing the full project. Good prep matters on metal, plastic, wood, and previously coated parts because the same color match can still look or perform differently if the substrate is not ready.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats the job needs. As a planning guide, a typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover between 400 and 600 square feet, but the real amount you need for Samson Coral Sand 25887 should be based on the actual part or area, not just the color name.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Samson Coral Sand enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Samson Coral Sand in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Samson Coral Sand in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.