Match of Samson™ Porcelain *

Use light, even coats and keep the can moving so you do not build up wet paint in one spot. Overlap each pass slightly, and avoid heavy passes that can cause runs, uneven sheen, or a muddy look in the color. For best results, spray the item in a controlled area and let each coat flash off as directed on the product label before adding the next coat.

Samson Porcelain 25738 in MyPerfectColor custom spray paint is best applied on parts where a steady spray pattern matters, such as trim pieces, vents, hardware, fixtures, or other small components. If the surface is rough, porous, or poorly prepped, the final color can read differently, so surface preparation and coat control are both important.

Coverage depends on the size of the item, the texture of the surface, the number of coats, and how much hiding power the color needs on the substrate. If you are ordering Samson Porcelain 25738 as custom spray paint, a typical can covers about 20 square feet with one coat. For other MyPerfectColor paint formats, coverage is typically about 400 to 600 square feet per gallon, depending on the product and application conditions.

If the surface is dark, uneven, or textured, plan for more material than a smooth, well-prepared surface would need. For a single fixture or a small set of parts matched to Samson Porcelain 25738, it is usually better to estimate conservatively so you do not run short before finishing the job.

Confirm Samson Porcelain 25738 from a physical swatch, an existing painted sample, or another known color reference from the original Samson brand before you order. Screen viewing alone is not reliable because monitors, phones, and lighting can shift how the color appears. MyPerfectColor matches to the selected brand color reference, so the target color should be verified before purchase.

This is especially important if the new piece will sit beside an existing Samson Porcelain surface, because aging, sheen, and substrate differences can make a close match look different in use. If you already know the color reference, make that the basis for the order rather than trying to judge it from the screen.

Choose the sheen based on how the item will be used and how much reflectivity you want on the finished part. Higher gloss finishes are usually easier to clean and look more reflective, while lower gloss finishes reduce shine and can hide small surface flaws better. The sheen you choose also changes how Samson Porcelain 25738 reads on the final item, even when the color match itself is correct.

If the product page offers multiple finishes, pick the one that best fits the part you are painting and the environment it will live in. For example, a hardware piece, grille, or fixture may benefit from a different sheen than a trim component or decorative accessory. The right sheen is part of getting the expected result, not just a visual preference.

Yes, Samson Porcelain 25738 is a practical match candidate when you need MyPerfectColor custom spray paint for small parts that are easier to spray than brush, such as trim details, vents, fixtures, railings, pipes, hardware, or accessories. Spray paint is often the most efficient way to coat parts that are awkward, removable, or hard to brush evenly.

For these projects, the main decision is usually whether the part can be prepared properly and whether the finish choice will fit the surface and use. If the item is metal, plastic, wood, or a previously coated surface, proper prep matters because the appearance and durability of the Samson Porcelain 25738 match depend on adhesion and coat quality.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Samson Porcelain enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Samson Porcelain in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Samson Porcelain in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.