Match of Sico™ 4129-31 Wafer *

Yes, but plastics can vary a lot, so test 4129-31 Wafer on the actual plastic before you paint the full item. MyPerfectColor spray paint sticks well to most plastics, but the exact material and surface prep can change adhesion.

If the plastic is slick or hard to coat, use the MyPerfectColor primer for Acrylic Enamel to improve adhesion. Clean the part first and test a small hidden area when possible.

Coverage for a match of 4129-31 Wafer depends on the size of the item, the texture of the surface, how much hiding power is needed, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat.

If the surface is rough, porous, or dark, plan for more material so you do not run short before the job is complete. Other MyPerfectColor paint formats typically cover about 400 to 600 square feet, depending on the product and application.

Yes. The finish changes how 4129-31 Wafer reflects light, so the same color can look different after application. A glossier finish is more reflective, while a flatter finish is less reflective.

When you order a match of 4129-31 Wafer, choose the finish with the item's use in mind because sheen is a practical coating choice that affects the final appearance of the painted part.

Confirm the target from a physical swatch or a known existing Sico color reference, not from a screen image alone. Device settings and lighting can change how 4129-31 Wafer appears on a display.

MyPerfectColor makes its own custom paint matched to the selected Sico color reference, so the key step is making sure 4129-31 Wafer is the exact target you want before you place the order.

Choose the finish for 4129-31 Wafer based on how the item will be used and cleaned. Higher gloss finishes are usually more reflective and easier to wipe, while lower gloss finishes reduce reflectivity.

The gloss level also changes how the matched color reads on the finished item, so the same 4129-31 Wafer match can look different depending on the finish you select.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Sico 4129-31 Wafer enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Sico 4129-31 Wafer in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Sico 4129-31 Wafer in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.