Match of Richard's Paint™ 3296-D Margate *

Choose the finish based on how the item will be used, because sheen changes both durability and how 3296-D Margate reads on the finished surface. Lower sheen finishes usually hide surface flaws better and reduce reflectivity, while higher sheen finishes are easier to wipe clean and can feel more durable on parts that get handled often.

If you are ordering MyPerfectColor paint matched to 3296-D Margate, remember that the same color can look slightly different in different sheens. A glossier finish can make the color appear a bit deeper or more reflective, while a flatter finish can make it look softer. Pick the sheen that fits the project first, then order the match in that finish.

Coverage depends on the surface size, texture, application method, and how many coats you need. A typical can of MyPerfectColor spray paint covers about 20 square feet with one coat, while other MyPerfectColor paint formats typically cover about 400 to 600 square feet per gallon-equivalent, depending on the product and surface.

For 3296-D Margate, plan for more material if the surface is rough, porous, or a difficult color to cover evenly. If you are painting trim parts, fixtures, hardware, or other small items, spraying is often efficient. For larger surfaces, measure the area and allow extra for test coats and any second coat needed to get an even result.

MyPerfectColor custom spray paint matched to 3296-D Margate is a practical choice when you need to color-coordinate small or awkward items that are hard to brush evenly. It is often useful for trim details, fixtures, railings, vents, pipes, hardware, accessories, and similar parts where a spray format is faster and more consistent than brushing.

This is especially helpful when the item needs to match a known paint color reference, but the part itself is not a wall or large panel. If the project involves a removable component, a metal piece, or a small fixture that will sit near other painted surfaces, ordering a match of 3296-D Margate in spray form can make application simpler.

Plastics vary a lot, so test the actual material before painting 3296-D Margate. MyPerfectColor spray paint adheres well to most plastics, but some plastics are more difficult than others and may need different prep or primer to get reliable adhesion.

If you want better adhesion on a challenging plastic or low-energy surface, use the MyPerfectColor primer for Acrylic Enamel before applying the color coat. For any unfamiliar substrate, it is smart to test a small area first so you can confirm adhesion and appearance before finishing the whole part.

Before ordering, confirm the exact color reference, the MyPerfectColor product format, the sheen, and the quantity you need. A custom-made color match is made to your selected 3296-D Margate reference, so it is important to make sure those choices are correct before you place the order.

Custom color matches are not returnable or refundable, so checking the details up front helps avoid ordering the wrong product. If you need a specific application format, such as spray paint for a small part or another MyPerfectColor format for a larger project, make that choice before checkout.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Richard's Paint 3296-D Margate enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Richard's Paint 3296-D Margate in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Richard's Paint 3296-D Margate in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.