Match of Behr™ 660E-1 Lavender Lace *

A match of Behr 660E-1 Lavender Lace is a color reference, not a sheen specification. Choose the finish based on how the item will be used and how much reflectivity you can accept. Higher sheen is usually easier to clean and can look more reflective, while lower sheen reduces reflection but may be less forgiving if the surface is not smooth.

If you are matching a specific part or fixture, confirm the color reference and the sheen before ordering because gloss level can change how a match of 660E-1 Lavender Lace looks on the finished item.

Yes, but surface prep is important. Clean the metal or existing coating so it is free of dirt, grease, chalk, and other contamination, then scuff it so the new coating can bond. If you are working on metal fixtures, railings, vent covers, speaker grilles, brackets, or hardware, pay special attention to rust, loose paint, and uneven old coating because those conditions can affect the final result.

Also keep in mind that the gloss, texture, and condition of the old surface can change how a match of 660E-1 Lavender Lace appears after application.

Coverage depends on the size of the part, the texture of the surface, how much the coating needs to hide, your application method, and how many coats are required. As a practical guide, a typical can of spray paint covers about 20 square feet with one coat, while other paint formats often cover about 400 to 600 square feet.

If you are coating rough plastic, metal, wicker, or a previously painted item, plan for coverage to be lower than on a smooth, light, evenly prepared surface. Order enough to complete the full job so you do not run short before the final coat.

Not always. Once a match of 660E-1 Lavender Lace is applied, lighting, placement, sheen, and nearby surfaces can change how it reads on the finished item. That matters on parts that sit beside existing painted surfaces or in areas with strong natural light, shade, or mixed lighting.

If the item will be installed next to an older coating, remember that age, texture, and gloss differences can make the new match read differently even when the color reference is correct.

Before you order, confirm the exact color reference, the MyPerfectColor product type, the sheen, and the quantity you need. Custom-matched paint made to 660E-1 Lavender Lace is made to order and is not returnable or refundable, so it is important to verify those details up front.

That is especially important if you need a specific format such as spray paint for small parts, fixtures, or other project pieces that need to coordinate with the same color target.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 660E-1 Lavender Lace enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 660E-1 Lavender Lace in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 660E-1 Lavender Lace in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.