Match of Porter Paints™ 16351-3 Pine Smoke *

Coverage depends on the size of the item, the surface texture, how much the surface absorbs, the application method, and how many coats you need for even color. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats usually cover about 400 to 600 square feet per unit, but the actual result still depends on the surface and the film build you apply.

If you are painting a small part, fixture, or accessory, plan for extra material if the surface is rough, dark, or likely to need more than one coat. That helps avoid running short before the color is fully covered.

MyPerfectColor spray paint matched to 16351-3 Pine Smoke is typically dry to the touch within minutes. Recoating is usually best after 1 to 2 hours, but handling and assembly should wait until the coating has had enough time to set up.

Full cure takes much longer, about two weeks. If the part will be reinstalled, stacked, or handled often, give it more time so you do not mark or mar the finish too early.

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the Porter Paints color name by itself. If you need SDS information for a MyPerfectColor match of 16351-3 Pine Smoke, use the MyPerfectColor Safety Data Sheets page.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

The color reference stays the same, but the finished appearance can still shift after application because of lighting, sheen, placement, and nearby surfaces. A MyPerfectColor match of 16351-3 Pine Smoke may read a little differently on a flat part than on a curved, textured, or highly visible item.

If the piece will sit next to an existing painted surface, the safest approach is to judge the finish on the actual item and in the actual lighting where it will be used. That reduces the chance of being surprised by how the color reads once installed.

Yes, but plastics vary a lot, so testing on the actual material is important before you paint the final part. MyPerfectColor spray paint sticks well to most plastics, but adhesion can still depend on the specific plastic, prep, and surface condition.

Using the MyPerfectColor primer for Acrylic Enamel can help improve adhesion on difficult surfaces. If the item is a low-energy plastic or an unfamiliar part, a test piece is the best way to confirm prep and coverage before you commit to the whole project.

MyPerfectColor has an original sample of the Porter Paints 16351-3 Pine Smoke in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Porter Paints 16351-3 Pine Smoke which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Porter Paints 16351-3 Pine Smoke, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.