Match of Rodda Paint™ 510 Lamplight *

MyPerfectColor spray paint matched to Rodda Paint 510 Lamplight is typically dry to the touch within minutes, ready to recoat in about 1 to 2 hours, and fully cured in about 2 weeks. Those are different milestones, so do not treat a dry surface as fully cured.

If the part will be handled, assembled, or put back into service soon after painting, plan around the full cure time rather than the dry-to-touch time.

Yes. MyPerfectColor custom spray paint matched to Rodda Paint 510 Lamplight is well suited for many small parts and hardware items such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar components.

For the best result, make sure the part is clean and properly prepared, and use the spray format only on items that can be coated safely and evenly. If the part will sit next to an existing painted surface, a test application on the actual item is a good way to check fit and finish before you commit to the full piece.

Even when the color match is correct, Rodda Paint 510 Lamplight can read differently after application because lighting, sheen, texture, placement, and nearby surfaces all affect how the finished part looks. A match that looks right in one setting may appear slightly different in another.

This matters most on small parts and items that sit beside an existing painted surface. If the appearance is important, check the finished item in the same lighting where it will be used.

Choose the finish based on how the part will be used and how much reflection you want. Lower-sheen finishes usually hide surface variation better, while higher-sheen finishes reflect more light and are often easier to wipe clean.

Keep in mind that sheen can change how Rodda Paint 510 Lamplight looks on the finished item, even when the color match is the same. If the product page offers multiple finish options, pick the one that fits the surface and the amount of wear the part will see.

Yes, but plastics vary widely, so Rodda Paint 510 Lamplight should be tested on the actual part before you paint the full item. MyPerfectColor spray paint sticks well to most plastics, but some smooth or low-energy surfaces need more prep to hold the coating reliably.

Using the MyPerfectColor primer can improve adhesion on challenging substrates. Clean the part well, follow the prep instructions for that material, and test first if the item is made from an unfamiliar plastic.

MyPerfectColor has an original sample of the Rodda Paint 510 Lamplight in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Rodda Paint 510 Lamplight which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Rodda Paint 510 Lamplight, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.