Match of Behr™ PEC-37 Dark Of Night *

Choose the finish based on how the part will be used and how much sheen you want to see on the finished item. MyPerfectColor can match Behr PEC-37 Dark Of Night in different product formats, but the sheen you order can change the way the color reads once it is applied.

If the item will be handled often or needs easier cleanup, a more durable finish may be the better fit. If you are matching a color on a visible fixture, remember that higher gloss usually makes the color look deeper and more reflective, while lower gloss can reduce shine. Select the finish before ordering because sheen is part of the final result.

Coverage depends on the surface size, texture, application method, and how many coats are needed for Behr PEC-37 Dark Of Night. For spray paint, a typical can covers about 20 square feet with one coat. Other MyPerfectColor paint formats often cover about 400 to 600 square feet, depending on the product and surface.

If the substrate is rough, porous, dark, or uneven, plan for more paint because additional coats may be needed for uniform coverage. For small parts, trim pieces, vents, hardware, or fixtures, it is usually safer to estimate on the high side so you do not run short before the final coat is complete.

Custom-made paint matches of Behr PEC-37 Dark Of Night should be chosen carefully before you place the order, because they are not returnable or refundable. Confirm the brand color reference, the MyPerfectColor product type, the sheen, and the quantity before buying.

If you are unsure about the surface, finish, or format, verify those details first so you order the right match the first time. This matters most when the color will be used on a specific part, fixture, or replacement piece that needs a precise product choice.

Before applying a match of Behr PEC-37 Dark Of Night to metal, clean the surface well, remove any rust or loose material, and scuff the existing finish so the new coating can bond properly. If the metal has contamination, peeling paint, or heavy corrosion, address that first or the final result may be uneven.

Also remember that gloss, texture, and the condition of the old coating can affect how the matched color looks after application. On metal parts, a test application is often useful when the item will sit near existing painted surfaces or when the original coating is in poor condition.

A match of Behr PEC-37 Dark Of Night will be matched to the selected color reference, but the finished appearance can still change based on lighting, placement, sheen, and nearby surfaces. A color that looks correct in one location may read a little differently once it is installed or viewed beside surrounding materials.

This matters most when the painted item will be placed next to an existing surface or viewed under strong light, shade, or mixed lighting. If visual consistency is important, evaluate the final part in the same conditions where it will be used, not just by the reference color alone.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr PEC-37 Dark Of Night enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr PEC-37 Dark Of Night in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr PEC-37 Dark Of Night in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.