Match of Behr™ 2A1-4 Salted Ash *

Plastics vary a lot, so the safest approach is to test 2A1-4 Salted Ash on the actual item before committing to the full project. MyPerfectColor custom spray paint matched to 2A1-4 Salted Ash can be used on many plastic parts, but slick or low-energy plastics may need better prep and a primer for reliable adhesion.

Clean the surface first, follow the product instructions, and if the plastic is especially smooth or flexible, do a small test area before spraying the entire part. Using the MyPerfectColor primer for acrylic enamel can improve adhesion on difficult substrates.

Coverage for 2A1-4 Salted Ash depends on the size of the item, the surface texture, the hiding power needed, the application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat, but real-world coverage can be lower on rough or porous surfaces.

If you are coating multiple parts, rough fixtures, or a dark base color, plan extra paint for additional coats and a small test spray. That helps reduce the risk of running short before the project is complete.

Choose the finish for 2A1-4 Salted Ash based on how the part will be used, how much cleaning it needs, and how reflective you want the finished surface to be. The sheen is part of the order decision because the gloss level changes both durability and the way the matched color reads after application.

Higher gloss finishes usually clean more easily and reflect more light, while lower gloss finishes reduce reflection but can show wear differently. If the part will sit near other painted surfaces, pick the finish that best matches the practical needs of that item, not just the color reference.

Even after you order a match of 2A1-4 Salted Ash, the finished appearance can change because of lighting, placement, sheen, and nearby surfaces. The same color can read differently on a flat panel, a curved part, or a surface sitting next to other materials.

If the item will be viewed in a specific location, check the coated part under the actual lighting where it will be used. That is the best way to judge the final appearance of MyPerfectColor paint matched to 2A1-4 Salted Ash.

2A1-4 Salted Ash custom spray paint is useful for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other parts that are awkward or inefficient to coat with a brush. It is also practical for removable components that need to match a known paint color reference.

MyPerfectColor supplies its own paint matched to Behr 2A1-4 Salted Ash, so it is a good fit when you need a repeatable color match on a small object, a replacement part, or a surface that is easier to spray than to brush.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 2A1-4 Salted Ash enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 2A1-4 Salted Ash in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 2A1-4 Salted Ash in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.