Match of Behr™ 5752 Natural Cedar *

Confirm Behr 5752 Natural Cedar from a physical swatch, fan deck, labeled sample, or an existing painted item from the original Behr color reference. Screen images can vary by device and lighting, so they are not a reliable ordering reference.

MyPerfectColor matches the selected brand color reference, so the safest order starts with a verified physical target. If you are matching an existing part, use the part only after you have confirmed it truly represents Behr 5752 Natural Cedar and not an aged or altered surface.

The color reference stays Behr 5752 Natural Cedar, but the finish can change how it looks after application. Matte, satin, and gloss all reflect light differently, so the same matched color can read lighter, deeper, or more reflective depending on sheen.

If you need the finished item to coordinate with an existing surface, choose the finish that best matches that surface's sheen. If function matters more than appearance, use the finish that fits the wear and cleaning needs of the part.

Start by cleaning the surface, removing grease, dust, and loose material. If the surface is glossy or otherwise hard to hold paint, light scuffing may help where it is appropriate. Mask off areas you do not want painted, and test on the actual surface before coating the full item.

If the substrate is very different from the reference item or has existing coating issues, use primer when needed for adhesion and uniformity. Good prep helps the MyPerfectColor match of Behr 5752 Natural Cedar lay down more evenly and reduces the chance of a poor result.

Yes. A custom spray paint match of Behr 5752 Natural Cedar is useful for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other parts that are awkward to coat with a brush.

It is also a practical choice for removable or small components where you want a repeatable color match in MyPerfectColor paint. For the best result, make sure the part is properly cleaned and prepared before spraying.

Choose sheen based on the part's use, not just the color name. Lower sheen finishes usually reduce reflection and can hide surface imperfections better, while higher sheen finishes are easier to wipe clean and will make Behr 5752 Natural Cedar look more reflective.

The same color match can look different at different gloss levels, so match the sheen to the surface you are coating when appearance consistency matters. If you are unsure, compare the finish you want against the existing item or the application environment before ordering.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 5752 Natural Cedar enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 5752 Natural Cedar in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 5752 Natural Cedar in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.