Match of Color Guild™ 8625D Shipyard *

The Safety Data Sheet is tied to the MyPerfectColor product chemistry, not to the Color Guild color name alone. For 8625D Shipyard, check the MyPerfectColor Safety Data Sheets page for the exact product you are ordering: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

If you are comparing formats, make sure the SDS you open matches the product type you plan to use, such as spray paint or another MyPerfectColor format.

Before applying a match of 8625D Shipyard to metal, clean off grease, dust, and loose debris, then scuff the surface so the coating can grip better. If the metal has rust, corrosion, or contamination, address that first because those issues can affect adhesion and the finished look.

The condition of the old coating matters too. Gloss, texture, and wear in the existing surface can change how the new coating reads even when the color match is correct. If the old finish is failing, remove or stabilize it before painting.

Plastics vary widely, so 8625D Shipyard should be tested on the actual material before you commit to the full project. MyPerfectColor spray paint sticks well to most plastics, but some plastics and low-energy surfaces still need better prep to reduce adhesion risk.

Using the MyPerfectColor primer can improve adhesion on difficult substrates. If the part is an unfamiliar plastic, clean it well, use the recommended prep steps, and test a small area first so you can confirm the coating behavior on that exact item.

Choose the finish based on how the item will be used and how you want the coated surface to perform. Higher gloss levels are usually easier to wipe clean and can look more reflective, while lower gloss levels reduce shine and may be more forgiving on surfaces with texture or minor imperfections.

With a match of 8625D Shipyard, the sheen also affects how the color appears on the finished item. The same color can read differently in flat, satin, or gloss finishes, so pick the finish that fits the application instead of treating sheen as a purely visual detail.

Coverage depends on the size of the item, surface texture, how much hiding is needed, the application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat, while other MyPerfectColor paints often cover about 400 to 600 square feet depending on the product and conditions.

If you are coating rough, porous, dark, or uneven surfaces with a match of 8625D Shipyard, plan for extra material. It is safer to base your order on the full surface area and expected coat count rather than on color name alone.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Color Guild 8625D Shipyard enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Color Guild 8625D Shipyard in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Color Guild 8625D Shipyard in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.