Match of Benjamin Moore™ Briarwood *

For Briarwood 107363, the finish you choose will change both how the color reads and how the part wears. Higher gloss finishes usually reflect more light, are easier to wipe clean, and can look a bit darker or richer on the finished item. Lower gloss finishes reduce reflection and can be more forgiving on textured or imperfect surfaces, but they may not clean as easily.

If the part will be handled often, mounted outdoors, or sprayed on a smooth metal or plastic fixture, pick the finish that best fits the use case in the MyPerfectColor format you are ordering. Remember that MyPerfectColor is supplying a custom match of Briarwood 107363, not Benjamin Moore's original paint product.

Before applying Briarwood 107363, clean the surface so dust, grease, and residue do not interfere with adhesion or color appearance. If the surface is glossy or already painted and sound, a light scuff can help the new coating grab better. Mask off nearby areas that should not receive overspray.

It is also smart to spray a small test area on the actual item before doing the full piece. That is especially useful on trim, vent covers, railings, hardware, or other parts where the finished look needs to be consistent across the whole surface.

Plastic and other low-energy surfaces can vary a lot, so Briarwood 107363 should always be tested on the actual material before you commit to the full part. MyPerfectColor spray paint sticks well to most plastics, but adhesion can still depend on the exact plastic, its surface texture, and how well it was cleaned and prepared.

If the part is slick, flexible, or hard to bond, use the MyPerfectColor primer for better adhesion before applying the Briarwood 107363 match. A small test panel is the safest way to confirm the result on items like vents, covers, housings, trim pieces, or molded accessories.

For Briarwood 107363 in spray paint, a typical can covers about 20 square feet with one coat. Actual coverage can be lower on rough, porous, or highly detailed surfaces, and it can also change if you need extra coats for better hiding.

Plan your order around the size of the item, the texture of the surface, and how many coats you expect to apply. If you are coating small parts, fixtures, or accessories, one can may be enough, but larger or more textured pieces usually need more product.

Confirm Briarwood 107363 from a physical swatch, fan deck, chip, or a known existing reference from Benjamin Moore rather than relying on a screen view. On-screen color can shift because of display settings, lighting, and device differences.

MyPerfectColor matches the original brand color reference, so the best ordering decision comes from verifying that Briarwood 107363 is the target you want to reproduce. This is especially important if the new coating will sit next to an existing painted surface or a part that must coordinate closely with a known Benjamin Moore color.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore Briarwood enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore Briarwood in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.