Match of Benjamin Moore™ AF-645 Chambourde *

Choose the finish based on how the part will be used and how much reflectivity you want on the finished item. With AF-645 Chambourde, a lower-gloss finish will usually look less reflective and can help reduce the look of small surface flaws, while a higher-gloss finish is easier to wipe down but can make texture and spray marks more noticeable.

Because this is a MyPerfectColor match of Benjamin Moore AF-645 Chambourde, the finish is a practical ordering choice, not part of the color name itself. For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint product options, so choose among the non-housepaint formats that fit your project.

Use light, even coats and keep the spray moving so AF-645 Chambourde builds gradually instead of going on in one heavy pass. Overlap each pass enough to avoid striping, and do not flood the surface, since heavy coats can cause runs, uneven sheen, or a muddy look in the final color.

This matters most on items like vents, switch covers, hardware, brackets, pipe, railings, and other removable parts where spray paint is the practical way to apply a match of Benjamin Moore AF-645 Chambourde. Follow the product directions for the specific MyPerfectColor format you ordered, and let each coat flash off before adding the next one.

Coverage for AF-645 Chambourde depends on the size of the item, the texture of the surface, how well the substrate hides, your application method, and how many coats are needed. If you are ordering custom spray paint, a typical can covers about 20 square feet with one coat as a rough planning guide.

For larger parts or for surfaces that are rough, porous, dark, or difficult to cover evenly, plan for extra material. A small fixture, grille, or set of hardware may need much less than a full can, while a larger panel, railing section, or series of coordinated parts can need more than one can to finish the job cleanly.

The SDS is tied to the specific MyPerfectColor product and chemistry, not to the Benjamin Moore AF-645 Chambourde color name alone. That means you should check the Safety Data Sheet for the exact MyPerfectColor format you are ordering.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

Primer depends on the substrate, the condition of the surface, and the paint format you are using for AF-645 Chambourde. A primer never hurts and can improve adhesion, but it is not always required if the surface is already sound and properly prepared.

Primer is often worth considering on bare, slick, glossy, porous, repaired, or hard-to-coat surfaces. For a match of Benjamin Moore AF-645 Chambourde, the safest approach is to follow the prep guidance for the specific MyPerfectColor product you ordered and test the surface if you are unsure.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore AF-645 Chambourde enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore AF-645 Chambourde in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.