70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore AF-80 Jute reads as a light beige-tan with a soft yellow warmth and low chroma. It is quiet rather than vivid, with a slightly earthy cast that can soften the look of metal and plastic parts without pushing them into a strong color shift.
MyPerfectColor custom spray paint matched to AF-80 Jute can be useful on PVC pipe, vent covers, return grilles, switch plates, mailboxes, railings, shelving brackets, picture frames, hardware, and small fixtures where a muted tan-beige finish is needed. The restrained warmth also suits removable components and trim details that need to stay visually calm rather than stand out.
Because this is a lighter, low-chroma color, the substrate can still influence the result. Dark plastic, bare metal, or patched surfaces may need proper prep and more than one coat for even coverage. Sheen and film build can also change how warm or beige the color reads, especially on smooth glossy parts.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore AF-80 Jute.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Confirm AF-80 Jute from a physical Benjamin Moore swatch, fan deck, or an existing sample that has already been verified. Screen viewing can shift with lighting and display settings, so it is not reliable for final ordering.
MyPerfectColor matches the selected Benjamin Moore color reference, so the best way to avoid ordering the wrong color is to verify the exact target before you place the order.
Yes, AF-80 Jute can be ordered in MyPerfectColor custom spray paint for many plastic projects, but plastics vary a lot. Test the spray on the actual plastic first, because different plastics can react differently to the same coating.
Clean the surface well and use the MyPerfectColor primer when adhesion is a concern or when the plastic is unknown. That is especially important for parts like covers, housings, grilles, and trim pieces where coating failure would be hard to fix.
For metal or a previously coated part, clean off dirt, oil, rust, and loose material before applying AF-80 Jute. Scuffing the surface helps the new coating bond, especially on smooth or glossy metal.
The condition of the old coating matters as much as the color match. If the old surface is damaged, chalky, uneven, or very glossy, the finished result can look different even when the AF-80 Jute match is correct. Test a small area first on visible parts.
No. The same AF-80 Jute color can read differently in matte, satin, or gloss because sheen changes how light reflects off the surface. A glossier finish usually makes the color look deeper and more reflective, while a flatter finish can make it look softer.
If you are coating only one component, remember that a finish change can make the new part stand out next to the original surface even when the color code is correct. Choose the sheen based on the full project, not just the color name.
Coverage depends on the size of the item, how smooth or porous it is, how much hiding power AF-80 Jute needs, the application method, and how many coats are required. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats usually cover about 400 to 600 square feet, but actual coverage can vary.
For small parts like vents, hardware, railings, baskets, brackets, or removable fixtures, count the number of pieces and allow extra material if the surface is rough or the color change is strong. For Benjamin Moore colors, MyPerfectColor offers non-housepaint formats such as custom spray paint and other specialty options.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore AF-80 Jute enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore AF-80 Jute in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.