Match of Dunn Edwards™ SP 112 Bone *

Yes, but plastics and other low-energy surfaces can vary a lot. MyPerfectColor spray paint matched to SP 112 Bone by Dunn Edwards can work on many plastics, but the safest approach is to test on the actual item first because prep and adhesion can change from one plastic to another.

If adhesion is a concern, use the MyPerfectColor primer for Acrylic Enamel before applying the color coat. Proper cleaning and surface prep are also important when you want a more reliable bond on plastic, trim pieces, or other hard-to-coat parts.

Coverage depends on the size of the item, the texture of the surface, the hiding power needed, how the paint is applied, and how many coats you expect to use. For planning, a typical can of spray paint covers about 20 square feet with one coat.

If you are painting a larger area, other paint formats usually cover about 400 to 600 square feet, depending on the product and application method. For SP 112 Bone by Dunn Edwards, it is best to size the order based on the real surface area and whether the part needs one coat or more than one coat for even coverage.

The Safety Data Sheet is tied to the MyPerfectColor product and paint chemistry, not to the brand color name alone. If you need SDS details for a match of SP 112 Bone by Dunn Edwards, check the MyPerfectColor Safety Data Sheets page for the specific product you are ordering.

That is the right place to confirm safety and compliance information before you start the job, especially if you are using spray paint on a site with material review or documentation requirements.

Yes. MyPerfectColor custom spray paint matched to SP 112 Bone by Dunn Edwards is a practical choice for small parts and hardware where a smooth sprayed finish is useful. It is commonly used for items like switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar removable parts.

If you are painting a small component, make sure the part is clean, properly prepared, and suitable for spray application. That helps the match of SP 112 Bone by Dunn Edwards read more consistently on the finished item.

For MyPerfectColor spray paint matched to SP 112 Bone by Dunn Edwards, dry-to-touch, recoat time, and full cure are different stages. Spray paint is typically dry to the touch within minutes, can usually be recoated in one to two hours, and is fully cured in about two weeks.

If you handle the part too soon, or recoat before the surface is ready, the finish can be affected. For best results on a match of SP 112 Bone by Dunn Edwards, follow the dry and recoat timing for the specific product you order and allow enough time for full cure before putting the item into service.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Dunn Edwards SP 112 Bone enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Dunn Edwards SP 112 Bone in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Dunn Edwards SP 112 Bone in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.