Match of Benjamin Moore™ OC-33 Opaline *

Confirm Benjamin Moore OC-33 Opaline from a physical swatch, an approved color sample, or a known existing painted reference before you order. Screen viewing can shift the color, so it is not a reliable way to verify the target. MyPerfectColor makes a custom-matched paint to the selected Benjamin Moore color reference, not the original Benjamin Moore paint product.

If you already know OC-33 Opaline is the target, order the MyPerfectColor match for that reference and use it on the item you are painting, such as a fixture, trim piece, cover, rail component, or other small part that needs to coordinate with the selected color.

Choose the finish based on how the item will be used and how much reflectivity you want, not just on the color name. With Benjamin Moore OC-33 Opaline, the same color can look different in low gloss versus higher gloss because sheen changes how light reflects off the surface.

For parts like vents, hardware, PVC pipe, access covers, or small fixtures, a lower sheen can hide surface irregularities better, while a glossier finish can be easier to wipe clean and may show more detail in the substrate. If you are ordering a MyPerfectColor match of OC-33 Opaline, pick the format and sheen that fit the object you are painting rather than assuming the color code includes that information.

Yes, MyPerfectColor spray paint matched to Benjamin Moore OC-33 Opaline can be used on many plastic parts, but plastics vary a lot and the surface still needs to be tested on the actual material. Some plastics accept coating well, while others need more preparation or a primer to improve adhesion.

For items such as PVC pipe, grilles, covers, brackets, or small molded parts, clean the surface first and test the match on a non-critical area if possible. Using the MyPerfectColor primer for Acrylic Enamel can help adhesion on difficult plastics, but the best result depends on the specific plastic and how well it is prepared.

Before applying a MyPerfectColor match of Benjamin Moore OC-33 Opaline over metal or an existing coating, clean the surface, remove contamination, and scuff it if the finish is smooth enough to need bite. Rust, grease, chalking, loose paint, and other surface problems can affect adhesion and final appearance.

Gloss, texture, and the condition of the old coating can also change how OC-33 Opaline reads after it is sprayed or applied. If you are painting metal fixtures, railings, mailboxes, hardware, or an older coated part, make sure the surface is stable and prepared before ordering the match so the result is based on a sound substrate.

Even when the MyPerfectColor match of Benjamin Moore OC-33 Opaline is correct, the finished item can still read differently because of lighting, sheen, texture, placement, and nearby surfaces. The same color may look warmer, cooler, lighter, or flatter depending on where and how it is viewed.

This matters on items like speaker grilles, vents, fixtures, panels, or other parts that sit near painted walls or ceilings. Once OC-33 Opaline is applied, the final appearance is influenced by the substrate and the environment around it, so the match should be judged on the actual object in its intended location rather than only on the original color reference.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OC-33 Opaline enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore OC-33 Opaline in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.