70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
This color reads as a very light off-white with a quiet warm cast and a faint creamy undertone. It is softer than a clean white and tends to look pale, muted, and low-chroma rather than bright or sharp.
MyPerfectColor custom spray paint matched to the selected Benjamin Moore color reference can be used on vent covers, switch plates, ceiling registers, speaker grilles, shelf brackets, small frames, hardware, mailbox parts, PVC pieces, and fixture housings where a light off-white needs to stay visually subdued. It also works well for other sprayable accessories and removable parts that need a coordinated finish without drawing attention to the surface.
Because this is such a light color, coverage can be more sensitive to the substrate beneath it. Darker plastics, metal, or uneven repairs may show through more easily, so surface prep, primer choice, and enough film build can matter. Finish also affects the result: gloss can make sheen differences and small surface flaws easier to notice, while flatter finishes usually read softer and less reflective.
Similar colors:
2145-70 Cotton Balls
2148-70 Mountain Peak White
OC-121 Mountain Peak White
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore OC-122 Cotton Balls.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Confirm OC-122 Cotton Balls from a physical swatch, a known original brand reference, or an existing part that already uses that color. Screen color can shift with monitor settings and room lighting, so it is not a reliable ordering reference.
MyPerfectColor makes a custom-matched paint to the selected brand color reference. Verifying the target color first helps avoid ordering a match of the wrong Cotton Balls reference.
For OC-122 Cotton Balls, clean the surface first, remove dust, oils, and grease, and let it dry fully. If the part is glossy or slick, a light scuff can help the coating grip better. Mask areas that should not be painted.
It is smart to test the MyPerfectColor match on the actual surface before doing the full item, especially on plastic, metal, or previously coated parts. Good prep can affect adhesion, coverage, and how the finished color reads on the part.
Choose the finish based on how the item will be used, not just the color name. Higher gloss finishes are usually easier to wipe down and reflect more light, while lower gloss finishes reduce shine and can hide texture better. The same OC-122 Cotton Balls match will look different as the sheen changes.
For small parts such as trim pieces, vents, hardware, railings, or PVC pieces, select the finish that best fits the surface and handling needs. MyPerfectColor supplies its own paint matched to OC-122 Cotton Balls, so the final look depends on both the color match and the finish you order.
Coverage for OC-122 Cotton Balls depends on the size of the item, surface texture, application method, and how many coats are needed. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats typically cover between 400 and 600 square feet, depending on the product and surface.
If the surface is textured, porous, dark, or difficult to hide, plan for extra material. For small projects like grilles, brackets, fixtures, or accessories, it is usually wise to allow for a test application and a second coat so you do not run short.
The SDS is tied to the MyPerfectColor product and chemistry, not to the OC-122 Cotton Balls color name alone. If you are buying a MyPerfectColor match of OC-122 Cotton Balls, use the Safety Data Sheets information for the exact product format you are ordering.
If you need the SDS before use, check the MyPerfectColor Safety Data Sheets page for the product. Confirm the exact item and format first, since the SDS can vary by product type.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore OC-122 Cotton Balls enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore OC-122 Cotton Balls in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.