70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore HC-38 Decatur Buff is a warm, muted tan-beige with a soft golden undertone and medium depth. It sits closer to an earthy buff than a crisp cream, so the color reads grounded and slightly subdued rather than bright or chalky.
MyPerfectColor custom spray paint matched to HC-38 Decatur Buff is useful for sprayable parts that need a warm neutral finish across different materials. It can be a practical choice for PVC trim pieces, vents, switch plates, mailbox parts, railings, brackets, picture frames, shelving, baskets, and other hardware or accessories that are easier to coat off the wall and need a consistent buff tone after proper preparation.
Because this color is mid-depth and moderately muted, it generally covers more predictably than very light tints, but the final look will still shift with substrate color, texture, and sheen. On darker or uneven surfaces, good prep and enough film build help keep the warm undertone from reading patchy. Finish also matters: a glossier application can make the surface condition and color depth more noticeable.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore HC-38 Decatur Buff.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Yes. A match of Benjamin Moore HC-38 Decatur Buff can be ordered as a MyPerfectColor custom spray paint matched to the selected Benjamin Moore color reference. This is a practical option for trim details, fixtures, railings, vents, pipes, hardware, accessories, and other parts that are easier to spray than to brush.
If the item is small, removable, or awkward to coat evenly with a brush, custom spray paint is often the more efficient format. It is still important to prep the surface correctly so the match and finish read as expected on the finished part.
For HC-38 Decatur Buff custom spray paint, dry-to-touch happens within minutes, recoating is typically done in 1 to 2 hours, and full cure takes about 2 weeks.
These are different stages. A part may feel dry quickly but still need more time before it is handled, stacked, or put back into service. If you need the best finish and durability, let the coating cure fully before heavy use.
Plastics vary a lot, so the safe approach is to test HC-38 Decatur Buff on the actual material first. MyPerfectColor spray paint adheres well to most plastics, but some low-energy plastics need more prep or a primer to improve adhesion.
For difficult plastic parts, use the MyPerfectColor primer recommended for acrylic enamel and verify the finish on a test area before painting the full item. That is the best way to reduce the risk of adhesion problems or unexpected appearance differences.
Before applying HC-38 Decatur Buff to metal or over an existing coating, clean the surface thoroughly, remove rust or contamination, and scuff any glossy finish so the new coating can bond properly. If the old coating is failing, peeling, or soft, it should be corrected before painting.
The condition of the existing surface matters as much as the color match. Gloss, texture, and wear can all change how HC-38 Decatur Buff looks after spraying, especially when you are coating only one part next to an older painted surface.
The SDS is tied to the MyPerfectColor product and chemistry, not to the HC-38 Decatur Buff color name by itself. To review safety information, use the MyPerfectColor Safety Data Sheets for the specific product format you are ordering.
If you are choosing between formats, check the SDS for that exact MyPerfectColor product before use so you are looking at the right safety and handling information for the coating you will actually apply.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore HC-38 Decatur Buff enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore HC-38 Decatur Buff in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.