70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore HC-104 Copley Gray reads as a muted, mid-depth warm gray with a subtle beige-olive undertone. Its low chroma keeps it restrained rather than crisp, and the LRV of 24.95 places it on the deeper side of the value range.
A match of Benjamin Moore HC-104 Copley Gray in MyPerfectColor custom spray paint can be used on vents, switch plates, speaker grilles, railings, mailbox parts, brackets, shutters, or PVC trim pieces when you want a subdued coordinated finish on small parts and fixtures. It also works for hardware, shelving supports, frames, and other sprayable accents where a quieter neutral is needed on metal, plastic, wood, or previously coated parts.
Because this is a low-chroma, mid-depth color, it usually covers more evenly than vivid colors, but the final appearance can still shift with sheen, substrate texture, and film build. On patchy or previously coated surfaces, differences in gloss and surface condition may remain visible, so surface preparation and even coverage matter. For exterior parts, finish choice can also nudge the color to look a little warmer or cooler.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore HC-104 Copley Gray.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Use a physical swatch from Benjamin Moore or another known existing reference for HC-104 Copley Gray, not a screen image alone. MyPerfectColor matches to the selected brand color reference, so the key step is confirming that HC-104 Copley Gray is the target color before you place the order.
If you are matching an existing part, compare it under the same lighting and against the actual swatch or item. That helps reduce the risk of ordering a color that is close, but not the one you need.
Even when the color match is correct, HC-104 Copley Gray can read differently once it is on the finished item because lighting, sheen, placement, and nearby surfaces all affect appearance. A match viewed indoors can look different in direct light, shade, or next to a textured or aged surface.
If the part will sit beside an existing painted area, test on the actual item first when approval is sensitive. That is the best way to judge the finished appearance before you commit to the full project.
Yes, but plastics vary a lot, so HC-104 Copley Gray should be tested on the actual material before you finish the project. Clean the part well, remove any release residue or contamination, and check adhesion on a small area first.
For difficult or slick plastics, use the MyPerfectColor primer to improve adhesion. That extra prep is important when you are coating PVC, molded parts, grilles, covers, or other items where the surface may resist paint.
Before applying a MyPerfectColor match of HC-104 Copley Gray to metal, clean off dirt, grease, oxidation, and loose material. If the metal has rust, treat or remove it first, then scuff the surface so the coating has a better profile to grab.
If you are painting over an existing coating, inspect it for peeling, chalking, or contamination. The condition of the old finish can affect adhesion and also change how the new HC-104 Copley Gray match looks when it is applied.
Choose the sheen based on how the part will be used, not just on the color name. Lower gloss finishes usually hide surface texture and prep marks better, while higher gloss finishes are easier to wipe clean but can make flaws and reflections more visible on HC-104 Copley Gray.
For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint options, so choose from the non-housepaint formats that fit your project. If appearance is important, match the finish level to the item you are coating and test on the actual substrate when possible.
For HC-104 Copley Gray, you are ordering a MyPerfectColor custom match of the Benjamin Moore color reference, not the original Benjamin Moore paint. For Benjamin Moore colors, MyPerfectColor does not offer interior or exterior house paint options.
The practical choices are non-housepaint formats such as custom spray paint, paint pens, brush-in-cap bottles, epoxy, or urethane, depending on the part and application method you need. Choose the format that fits the substrate, the size of the item, and how much control you need during application.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore HC-104 Copley Gray enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore HC-104 Copley Gray in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.