70% of Orders Ship within 3 Business Days.
Match of Benjamin Moore™ 1660 Polar Ice *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore 1660 Polar Ice reads as a very light blue-gray with a cool undertone and low chroma. It has a soft, restrained character rather than a bright or icy one, and the slight blue-green shift keeps it from looking flat.
MyPerfectColor custom spray paint matched to 1660 Polar Ice can be used on vents, switch covers, speaker grilles, conduit, pipe runs, brackets, railings, shelving parts, and other small fixtures where a pale cool color is needed on metal, plastic, wood, or previously coated surfaces. It is also a practical choice for mailboxes, shutters, hardware, and removable accessories that need a repeatable match.
Because this is a very light color, darker substrates or uneven prep can show through more readily, so coverage may improve with a uniform base and proper film build. Finish, texture, and substrate can shift how blue or gray it appears, and glossier finishes will usually make surface irregularities and sheen differences more noticeable.
Similar colors:
Product Data
About Benjamin Moore Paints
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore 1660 Polar Ice.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of Benjamin Moore™ 1660 Polar Ice *
What prep should I do before ordering 1660 Polar Ice in MyPerfectColor custom spray paint?
For 1660 Polar Ice, start with a clean, dry surface. Remove dirt, grease, and loose coating, then use light scuffing where the material and condition call for it. Mask off areas you do not want painted, and test the MyPerfectColor match on the actual surface before finishing the full part.
This is especially important because MyPerfectColor supplies a match of 1660 Polar Ice in its own paint, not Benjamin Moore's original paint product, and surface prep can affect how the color reads on the finished item.
Can 1660 Polar Ice be ordered in MyPerfectColor custom spray paint for switch covers, knobs, vents, or brackets?
Yes. A match of Benjamin Moore 1660 Polar Ice is a practical choice for MyPerfectColor custom spray paint on small parts such as switch covers, knobs, vents, speaker grilles, trim pieces, brackets, and similar items where a smooth sprayed finish is useful.
For best results, treat it as a color-match project for the specific part you are coating. MyPerfectColor is supplying paint matched to 1660 Polar Ice, so the main decision is choosing the right format and preparing the part properly before spraying.
Will 1660 Polar Ice in MyPerfectColor spray paint work on plastic parts?
Plastics vary a lot, so 1660 Polar Ice should always be tested on the actual plastic before you coat the full item. MyPerfectColor spray paint sticks well to most plastics, but difficult or low-energy surfaces can still need extra prep.
To improve adhesion, use the MyPerfectColor primer for Acrylic Enamel when the substrate calls for it. Clean the part first, then test the finish and adhesion on the real material so you can confirm the result before committing to the whole project.
How do I choose a finish for 1660 Polar Ice when ordering MyPerfectColor paint?
Finish choice matters because the same 1660 Polar Ice color can look different in different sheens. Lower gloss finishes reduce reflectivity and can make surface texture less noticeable, while higher gloss finishes are easier to clean and usually more durable on handled parts.
If the item will sit next to an existing painted surface, test the selected sheen on the same material whenever possible. The best finish is the one that fits the use of the part and the look you want from the matched coating, not just the color name alone.
Where can I find the SDS for 1660 Polar Ice in MyPerfectColor?
The SDS is tied to the exact MyPerfectColor product and chemistry, not to the Benjamin Moore color name alone. For 1660 Polar Ice, check the Safety Data Sheet for the specific format you are ordering, such as spray paint or another specialty product.
If you need the SDS before ordering, use the MyPerfectColor Safety Data Sheets page and look for the product that matches your selected 1660 Polar Ice format.
How quickly will I receive my paint matched to Benjamin Moore 1660 Polar Ice?
What are the RGB, HEX and LRV values for Benjamin Moore 1660 Polar Ice?
What is spray paint matched to Benjamin Moore 1660 Polar Ice made of? And how much area will one can cover?
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 1660 Polar Ice enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Is Benjamin Moore Paint used to make Benjamin Moore 1660 Polar Ice?
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
Can I buy Benjamin Moore 1660 Polar Ice locally?
How do I convert Benjamin Moore 1660 Polar Ice to a different color from another paint company?
While we can provide Benjamin Moore 1660 Polar Ice in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.