Benjamin Moore™ 532 Aura Waterborne Interior Bath & Spa Matte Finish Paint (Quarts or Gallons)
If you have bathroom with a shower, more than likely you've noticed drip marks on the wall that just doesn't come off. This is due to two things: first, the water itself has minerals in it that remain on the surface once the water evaporates. And second, the water leaches surfactants from the paint film. These surfactants come from the universal colorants that paint companies use to tint colors. The Benjamin Moore Aura Bath and Spa paint uses revolutionary new paint technology that doesn't rely on surfactants and therefore won't create these drip marks. Moreover, this new paint is extra washable and durable and therefore will improve your ability to remove any mineral deposit build up from your walls. It is also super mildew resistant.
Key Features of Benjamin Moore's Aura Paint:
- Available in any color
- Fully washable in any sheen
- Fast one-hour recoat time
- Exceptional flow and leveling
- Seamless touch-up
- Richer, more enticing color
- Maximum hide in all colors
- Unsurpassed surface smoothness
From the can label:
Aura Interior 100% Acrylic Eggshell Finish Paint (524)
Aura Eggshell Finish is part of the Gennex Proprietary paint and colorant system. Tint bases only with Gennex Waterborne Colorant.
Recommended for new or previously painted wallboard, plaster, wood, masonry or wallpapered surfaces; primer or previously painted metal; new or coated acoustic ceilings. Provides a mildew resistant coating.
400-450 square feet per gallon (37.1; 41.8 square meters), depending on the porosity and texture of the substrate.
Surfaces to be painted must be clean, dry and free of wax, grease, scaling paint and mildew. Glossy areas should be dulled. Remove wall covering if there is evidence of bleeding colors.
Aura Eggshell Finish is self-priming for most colors and surfaces. Consult with your retailer (myperfectcolor.com) concerning deep colors that require use of Aura Color Foundation. Special purpose primers may be needed for specific surfaces or surfaces that are water stained, smoke damaged or very slick.
[If ordering through myperfectcolor.com, you will be notified by customer service if your color requires the Color Foundation. Most colors do not require this color primer.]
Stir thoroughly before use. Do not thin with water. Never add other paints or solvents. For best results, use the Benjamin Moore Premium 3/8-inch Micro-fiber Applicator. Apply generously from unpainted area into wet area. This product can also be applied by brush or spray. Do not apply when air and surface temperatures are below 50-degrees Fahrenheit.;See more detailed application instructions.
Dries to touch and can be recoated after one hour. High humidity may prolong drying time. Painted surfaces can be washed after a minimum of 2 weeks.
Promptly use soap and warm water. USE COMPLETELY OR DISPOSE OF PROPERLY. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state-designated environmental agency on disposal options.