Benjamin Mooreâ„¢ 310 Regal Interior Pearl Finish Paint - Gallon

Benjamin Moore Regal Pearl Finish, formerly Benjamin Moore Regal Aquapearl Tint Based only with Benjamin Moore Color Preview Colorant. An easy to apply, durable satin finish for any interior application provides a mildew resistant coating.

USE

• New or previously painted wallboard, plaster, masonry or wallpaper surfaces
• Primed or previously painted wood or metal

COVERAGE

• 400-450 sq. ft. (37.1-41.8 sq meters) per gallon, depending on the porosity and texture of the substrate  

SURFACE PREPERATION

• Surfaces to be painted must be cleaned, dry, and free of wax, grease, scaling paint and mildew
• Glossy areas should be dulled
• Remove wall covering if there is evidence of bleeding colors

 PRIMING

• For best results when a significant color change is desired, Regal Primer (N216) should be tinted to the approximate finish coat color. Certain deep custom colors may require a Deep Base Primer tinted to a special prescription formula to achieve the desired color. Consult your retailer [support@myperfectcolor.com]
• Ask your retailer [support@myperfectcolor.com] about our special purpose primers if the surface to be painted is water stained, smoke damaged, greasy or very slick

APPLICATION

• Use product if surface temperature is above 50f (10c)
• Stir thoroughly before use; apply one or two coats
• For best result, use a Benjamin Moore premium applicator for latex paints. Apply paint generously from unpainted area into wet area
• This product can be applied by brush, roller or spray

 DRYING

• Dries to touch: 1 hour. Recoat after 2 to 3 hours
• Painted surfaces can be washed after 2 weeks; high humidity may prolong drying time 

CLEAN UP

• Use soap and water
• Use Completely Or Dispose Of Properly. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state- designated environmental agency or disposal options.