Benjamin Mooreâ„¢ 526 Aura Waterborne Interior Satin Finish Paint - Gallon

From the can label:

Aura Interior 100% Acrylic Satin Finish Paint (526)

Aura Satin Finish is part of the Gennex Proprietary paint and colorant system. Tint bases only with Gennex Waterborne Colorant.

USE

Recommended for new or previously painted wallboard, plaster, wood, masonry or wallpapered surfaces; primer or previously painted metal; new or coated acoustic ceilings. Provides a mildew resistant coating.

COVERAGE

400-450 square feet per gallon (37.1 ? 41.8 square meters), depending on the porosity and texture of the substrate.

SURFACE PREPARATION

Surfaces to be painted must be clean, dry and free of wax, grease, scaling paint and mildew. Glossy areas should be dulled. Remove wall covering if there is evidence of bleeding colors.

PRIMING

Aura Satin Finish is self-priming for most colors and surfaces. Consult with your retailer (myperfectcolor.com) concerning deep colors that require use of Aura Color Foundation. Special purpose primers may be needed for specific surfaces or surfaces that are water stained, smoke damaged or very slick.

[If ordering through myperfectcolor.com, you will be notified by customer service if  your color requires the Color Foundation. Most colors do not require this color primer.]

APPLICATION

Stir thoroughly before use. Do not thin with water. Never add other paints or solvents. For best results, use the Benjamin Moore Premium 3/8-inch Micro-fiber Applicator. Apply generously from unpainted area into wet area. This product can also be applied by brush or spray. Do not apply when air and surface temperatures are below 50-degrees Fahrenheit. See more detailed application instructions.

DRYING

Dries to touch and can be recoated after one hour. High humidity may prolong drying time. Painted surfaces can be washed after a minimum of 2 weeks.

CLEAN UP