Regal Premium Interior 100% Acrylic Matte Finish Paint (N221)

Benjamin Moore Regal Matte Finish Tint Bases only with Benjamin Moore Color Preview colorant. The decorative, easy to apply, flat- finish that washes clean with soap and water. Provides a mildew resistant coating.

COVERAGE

• 400-450 sq. ft. (37.1-41.8 sq meters) per gallon, depending on the porosity and texture of the substrate

SURFACE PREPERATION 

• Surfaces to be painted must be cleaned, dry, and free of wax, grease, scaling paint and mildew
  
• Glossy areas should be dulled
  
• Remove wall covering if there is evidence of bleeding colors

PRIMING 

• 
  
  For best results when a significant color change is desired, Regal Primer (N216) should be tinted to the approximate finish coat color. Certain deep custom colors may require a Deep Base Primer tinted to a special prescription formula to achieve the desired color. Consult your retailer


• 
  
  Ask your retailer [support@myperfectcolor.com] about our special primers if the surface to be painted is water stained, smoke damaged, greasy or very slick

 APPLICATION

• 
  
  Use product if surface temperature is above 50f (10c)


• 
  
  Stir thoroughly before use; apply one or two coats


• 
  
  For best result, use a Benjamin Moore premium applicator for latex paints. Apply paint generously from unpainted area into wet area


• 
  
  This product can be applied by brush, roller or spray  

DRYING

• 
  
  Dries to touch: 1 hour. Recoat after 2 to hours


• 
  
  Painted surfaces can be washed after 2 weeks; high humidity may prolong drying time

CLEAN UP

• 
  
  Use soap and water


• 
  
  Use Completely Or Dispose Of Properly. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state- designated environmental agency or disposal options.