Benjamin Moore New Aura Quart Yellow Foundation Primer.
For a few bright red and yellow colors, interior Aura paint requires a coat of the foundation primer. This ensures two coat coverage. One coat is the foundation, and the second/final coat is the Aura finish.
Please indicate the final color that will be used since the foundation primer is tinted even though the base is already red or yello.
Aura paint uses revolutionary new color science technology to offer features and benefits previously unavailable in paint. This new paint offers guaranteed two-coat coverage with any color over even an unprimed new sheetrock wall. It is super durable, low odor, super coverage, super-time saving paint!
Key Features of Benjamin Moore's Aura Paint:
From the can label:
Aura Interior 100% Acrylic Matte Finish Paint (522)
Aura Matte Finish is part of the Gennex Proprietary paint and colorant system. Tint bases only with Gennex Waterborne Colorant.
USE
Recommended for new or previously painted wallboard, plaster, wood, masonry or wallpapered surfaces; primer or previously painted metal; new or coated acoustic ceilings. Provides a mildew resistant coating.
COVERAGE
400-450 square feet per gallon (37.1 – 41.8 square meters), depending on the porosity and texture of the substrate.
SURFACE PREPARATION
Surfaces to be painted must be clean, dry and free of wax, grease, scaling paint and mildew. Glossy areas should be dulled. Remove wall covering if there is evidence of bleeding colors.
PRIMING
Aura Matte Finish is self-priming for most colors and surfaces. Consult with your retailer (myperfectcolor.com) concerning deep colors that require use of Aura Color Foundation. Special purpose primers may be needed for specific surfaces or surfaces that are water stained, smoke damaged or very slick.
[If ordering through myperfectcolor.com, you will be notified by customer service if your color requires the Color Foundation. Most colors do not require this color primer.]
APPLICATION
Stir thoroughly before use. Do not thin with water. Never add other paints or solvents. For best results, use the Benjamin Moore Premium 3/8-inch Micro-fiber Applicator. Apply generously from unpainted area into wet area. This product can also be applied by brush or spray. Do not apply when air and surface temperatures are below 50-degrees Fahrenheit. See more detailed application instructions.
DRYING
Dries to touch and can be recoated after one hour. High humidity may prolong drying time. Painted surfaces can be washed after a minimum of 2 weeks.
CLEAN UP
Promptly use soap and warm water. USE COMPLETELY OR DISPOSE OF PROPERLY. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state-designated environmental agency on disposal options.
|
